6FX3002-5CL01 Pre-Assembled Power Cable 15m for S-1FL6 Motor
Product Introduction
The Siemens 6FX3002-5CL01 is a pre-assembled power cable designed specifically for the S-1FL6 HI 400 V motor series. It works seamlessly with V70 and V90 frame AA and A drives. This cable belongs to the MOTION-CONNECT 300 family and carries UL/CSA approval.
Many engineers prefer this 6FX3002-5CL01 model because it reduces wiring errors. Its angular connector allows flexible cable outlet direction. You can rotate it in fixed increments, but note that connector disassembly is required.
Additionally, this cable supports a maximum torsional stress of 30°/m. It also withstands up to 1,000,000 bending cycles under flexible installation. Therefore, it suits dynamic applications like robotic arms or linear axes.
Electrical Specifications
The 6FX3002-5CL01 contains 4 x 1.5 mm² power conductors. Its test voltage reaches 4,000 V RMS for power conductors. The rated voltage U0/U stands at 600 V / 1000 V according to EN 50395.
For safety, the cable operates reliably under permanent installation. It also meets CE marking and RoHS conformity requirements. Meanwhile, the insulation uses PVC material, which provides robust electrical isolation.
Mechanical and Environmental Data
The smallest bending radius for fixed installation is 6 x cable diameter. For flexible installation, this radius is 155 mm. Maximum tensile stress reaches 50 N/mm² for fixed setups and 20 N/mm² for moving applications.
Furthermore, the ambient temperature range for permanently installed cables spans from -25 °C to 80 °C. The cable sheath is made of PVC and resists mineral oil as per EN 60811-2-1. Flame resistance complies with EN 60332-1-1 to 1-3.
Installation Guidelines
Before installation, verify that the connector orientation matches your drive layout. You must disassemble the connector to adjust the cable outlet direction. After setting the desired angle, reassemble the connector carefully.
Use proper cable clamps to relieve tensile stress. For fixed installations, ensure the bending radius is at least six times the cable diameter. For flexible applications, avoid exceeding 155 mm bending radius.
Moreover, do not exceed the torsional stress limit of 30°/m. This cable is not designed for continuous twisting applications like coiling reels. However, it performs excellently in cable chains with moderate bending.
Packaging List
1 x Siemens 6FX3002-5CL01 pre-assembled power cable (length: 15.0 m)
1 x Angular connector (pre-installed, cable outlet adjustable)
No mounting accessories or tools are included
Shipping method: Fedex, UPS, DHL
Frequently Asked Questions (FAQ)
Is the Siemens 6FX3002-5CL01 compatible with V90 drives?
Yes, this cable works perfectly with both V70 and V90 drives for S-1FL6 HI 400V motors.
Can I use this cable outdoors?
The cable is rated for industrial indoor use. Its PVC sheath offers oil resistance but not direct UV exposure.
What is the maximum length available for this model?
The described version is 15 meters. For other lengths, check the 6FX3002 series datasheet.
Does this cable support drag chain installation?
Yes, flexible installation allows up to 1,000,000 bends. However, respect the 155 mm bending radius.
How do I rotate the angular connector?
You must first disassemble the connector. Then rotate it in fixed increments before reassembling.
