Siemens 6FX3002-5CL02-1BA0 S-1FL6 HI Motor Cable 400V

Siemens 6FX3002-5CL02-1BA0 Power Cable – Product Introduction

The 6FX3002-5CL02-1BA0 belongs to Siemens’ MOTION-CONNECT 300 family. This pre-assembled power cable connects S-1FL6 HI 400V servo motors to V70 and V90 drives. Specifically, it supports frame size AA motors.

Furthermore, the 6FX3002-5CL02-1BA0 uses a 4 x 1.5 mm² conductor configuration. It provides reliable power transmission for industrial motion control applications. The cable length is exactly 10.0 meters.

Additionally, this model features a straight connector on the motor side. The connector has a fixed cable outlet direction. This design simplifies installation in machine cabinets and along cable carriers.

Technical Specifications

• Number of cores x cross-section: 4 x 1.5 mm²

• Test voltage (power conductors): 4000 V RMS

• Rated voltage U0/U (EN 50395): 600 V / 1000 V

• Smallest bending radius (fixed installation): 6 x diameter

• Smallest bending radius (flexible installation): 155 mm

• Maximum number of bends: 1,000,000

• Tensile stress (fixed installation): 50 N/mm² max.

• Tensile stress (flexible installation): 20 N/mm² max.

• Torsional stress: ±30°/m

• Connection type: Straight connector (fixed cable outlet direction)

• Length: 10.0 m

• Motor side connector max. diameter: 8.1 mm

Compatibility and Application

The 6FX3002-5CL02-1BA0 is specifically designed for:

• S-1FL6 HI 400V servo motors

• SINAMICS V70 servo drives

• SINAMICS V90 servo drives

• Frame size AA motors

However, please note that this cable has No UL approval. Therefore, it may not suit applications requiring UL certification in North America.

Meanwhile, the MOTION-CONNECT 300 series suits standard industrial environments. For more demanding applications with continuous flexing, consider higher series like MOTION-CONNECT 500.

Mechanical and Environmental Features

This power cable handles significant mechanical stress. For instance, it tolerates up to 1 million bending cycles. Additionally, it withstands torsional movement of ±30° per meter.

The smallest bending radius for flexible installation is 155 mm. Therefore, you can use the 6FX3002-5CL02-1BA0 in moving cable chains with proper radius planning.

Fixed installations allow an even tighter bending radius of just 6 times the cable diameter. Moreover, the maximum tensile stress reaches 50 N/mm² for stationary use.

Installation Guidelines

First, ensure the drive and motor are properly mounted and powered off. Next, connect the straight connector to the motor side of your S-1FL6 HI 400V frame AA motor. The connector diameter is 8.1 mm maximum.

Then, route the 6FX3002-5CL02-1BA0 to your V70 or V90 drive. Avoid sharp edges and excessive tension. After that, connect the other end to the drive's power terminals according to the wiring diagram.

Finally, secure the cable using appropriate strain relief. Additionally, maintain a bending radius no smaller than 155 mm for flexible sections. This ensures maximum service life of 1 million bending cycles.

Packaging List

• 1 x 6FX3002-5CL02-1BA0 pre-assembled power cable (10 meters)

• 1 x Straight connector (pre-assembled on motor side)

Note: No certificate or warranty document is included in the package.

Shipping

We ship worldwide using FedEx, UPS, or DHL. Gross weight is approximately 1.85 kg. Package dimensions depend on coiling method but typically measure 35 x 35 x 8 cm.

Frequently Asked Questions (FAQ)

1. Does the 6FX3002-5CL02-1BA0 work with S-1FL6 LI (low inertia) motors?
Yes, but verify the frame size first. The 6FX3002-5CL02-1BA0 fits frame AA motors. Check your motor datasheet for compatibility.

2. Why does this cable have no UL approval?
The 6FX3002-5CL02-1BA0 belongs to MOTION-CONNECT 300, which targets standard CE-marked markets. For UL-approved versions, select MOTION-CONNECT 500 or 800 series cables.

3. Can I use this cable in a continuous flex application?
Yes, provided you respect the 155 mm minimum bending radius. The 6FX3002-5CL02-1BA0 supports up to 1 million bending cycles under proper conditions.

4. What is the difference between straight and angled connectors?
The straight connector on 6FX3002-5CL02-1BA0 exits the cable axially from the motor. Angled connectors (90°) suit tight spaces. Choose based on your cabinet layout.

5. Is this cable suitable for 480V systems?
The rated voltage is 600/1000V U0/U. Therefore, the 6FX3002-5CL02-1BA0 works safely on 480V systems. However, always verify local electrical codes.