6FX3002-5CL12-1AF0 Siemens Power Cable Preassembled

Siemens 6FX3002-5CL12-1AF0 Preassembled Power Cable

Product Introduction

The 6FX3002-5CL12-1AF0 is a preassembled power cable from Siemens under the MOTION-CONNECT 300 series. Specifically, it supports S-1FL6 HI 400V motors when paired with V70 or V90 servo drives in frame sizes B and C. Additionally, this cable uses a straight connector with a fixed outlet direction. Its compact design allows a maximum outer diameter of 9.7 mm. Consequently, you get reliable power transmission for industrial motion control applications.

Technical Specifications

Electrical Data

• Number of cores x cross-section: 4 x 2.5 mm²

• Test voltage (power conductors): 4000 V RMS

• Rated voltage U0/U (EN 50395): 600 V / 1000 V

Mechanical Data

• Smallest bending radius (fixed): 6 x cable diameter

• Smallest bending radius (flexible): 155 mm

• Max. number of bends: 1,000,000 cycles

• Tensile stress (fixed install): 50 N/mm² max.

• Tensile stress (flexible install): 20 N/mm² max.

• Torsional stress: absolute 30°/m

Cable Construction

• Connector type: Straight connector with fixed cable outlet

• Length: 5.0 meters

• Motor side connector: Preassembled for S-1FL6 HI motors

Furthermore, the 6FX30025CL121AF0 (alternative ordering reference) shares all identical specifications. Therefore, you can use this cable in automated production lines, CNC machinery, and robotic systems. Moreover, its MOTION-CONNECT 300 designation ensures tested reliability for continuous flex applications.

Mechanical & Environmental Performance

First, the cable withstands up to 1 million bending cycles. This makes it suitable for cable carriers and moving machine parts. Next, the fixed installation bending radius is only 6 times the cable diameter. Meanwhile, the flexible installation radius is 155 mm. For tensile loads, fixed installation permits 50 N/mm², while flexible installation allows 20 N/mm². However, avoid exceeding the torsional stress limit of 30° per meter. Finally, the operating temperature range follows standard Siemens MOTION-CONNECT 300 guidelines (typically -20°C to +80°C for power cables).

Installation Guidelines

Step-by-Step Wiring Notes

1. Always disconnect power before handling the 6FX3002-5CL12-1AF0.

2. Match the 4 x 2.5 mm² cores to your drive’s U, V, W, and ground terminals.

3. Secure the straight connector firmly on the motor side until it clicks.

4. Use a cable diameter of ≤9.7 mm to fit through the motor connector housing.

5. For fixed installations, maintain at least 6 times the cable diameter bend radius.

6. For flexible tracks, ensure the bending radius stays above 155 mm.

Additionally, avoid sharp edges or kinking during routing. Specifically, preassemble the connector before final mounting. Therefore, you reduce stress on internal wires.

Why Choose This Preassembled Cable?

Reliability – Siemens MOTION-CONNECT 300 cables undergo rigorous testing.
Convenience – Preassembled ends save time and eliminate wiring errors.
Compatibility – Perfect match for S-1FL6 HI 400V motors with V70/V90 drives (size B/C).
Durability – Rated for 1 million flex cycles and high tensile loads.

In comparison to field-assembled cables, the 6FX3002-5CL12-1AF0 guarantees consistent performance. Moreover, its 5m length offers flexibility for machine layouts without excess slack.

Packaging List

• 1 x Preassembled power cable 6FX3002-5CL12-1AF0 (5.0 m length)

• 1 x Straight connector (fixed outlet direction, pre-mounted on motor side)

• No additional certificates or warranty documents included

Note: The product is shipped in original Siemens packaging without extended warranty or calibration certificates.

Shipping Information

• Carrier options: FedEx, UPS, DHL

• Packaging dimensions: 19.69 x 19.69 x 3.15 inches

• Gross weight per unit: 2.249 lb

• Standard lead time: 2–5 business days after order processing

Frequently Asked Questions (FAQ)

1. Is the 6FX3002-5CL12-1AF0 suitable for UL-certified installations?
No, this specific cable has "No UL" marking. Therefore, avoid using it where UL listing is mandatory. For UL requirements, please select a different Siemens MOTION-CONNECT variant.

2. Can I use this cable with other motor brands besides Siemens S-1FL6?
Technically, you can use it for any 400V motor requiring a 4 x 2.5 mm² power cable. However, the straight connector is preconfigured for Siemens S-1FL6 HI motors. Consequently, check connector compatibility before ordering.

3. What happens if I exceed the maximum bending cycles?
Exceeding 1,000,000 bends may cause insulation wear or conductor breakage. Specifically, the cable’s torsional and tensile performance will degrade. Therefore, replace the 6FX30025CL121AF0 once it approaches the cycle limit.

4. Does the 5m length include the connector or just the wire?
The 5.0 meters refers to the total cable length including the preassembled connector. You receive a ready-to-use assembly. No additional cutting or stripping is required before installation.

5. What is the difference between MOTION-CONNECT 300 and 500?
MOTION-CONNECT 300 (like this 6FX3002-5CL12-1AF0) is designed for standard industrial environments with moderate flexing. MOTION-CONNECT 500 supports higher dynamic loads and longer cable carrier travel. Choose based on your machine's movement severity.