Siemens 6AR1303-0AA01-0AA0 Interface Module 10 Mbit/s

Siemens 6AR1303-0AA01-0AA0 Interface Module for Ethernet Automation

Product Introduction

The Siemens 6AR1303-0AA01-0AA0 functions as an interface module within the I/O Modules product line. This unit integrates seamlessly into Ethernet networks and supports a transmission rate of 10 Mbit/s. Weighing only 0.49 lbs (0.22 kg) , it allows straightforward installation in crowded cabinets.

For instance, you can use this interface module for data exchange between controllers and field devices. Additionally, the Siemens 6AR1303-0AA01-0AA0 carries CE certification, which confirms its compliance with European safety standards. Its IP20 protection class makes it suitable for general indoor environments.

Technical Specifications

• Network Type: Ethernet

• Transmission Rate: 10 Mbit/s

• Maximum Ambient Temperature: 60°C

• Minimum Ambient Temperature: 0°C

• Operating Humidity: Up to 80% RH (non-condensing)

• Storage Humidity: Up to 80% RH (non-condensing)

• Maximum Operating Altitude: 1000 meters above sea level without derating

• Protection Class: IP20

• Certification: CE

• Application: Automation

This configuration ensures stable communication for basic automation networks. Furthermore, the 10 Mbit/s rate works well for legacy systems or applications that do not require high bandwidth.

Mechanical and Environmental Parameters

• Weight: 0.22 kg (0.49 lbs)

• Housing: Standard industrial design

• Operating Temperature: 0°C to 60°C

• Storage Temperature: Similar range, avoid freezing

• Humidity Tolerance: 80% RH, non-condensing

• Altitude Performance: Full rating up to 1000 meters

Therefore, you can deploy this interface module in many factory floors, control rooms, or laboratory settings. However, avoid areas with condensing humidity or altitudes above 1000 meters without checking derating requirements.

Installation Guidelines

First, select a clean indoor location with temperatures between 0°C and 60°C. Next, mount the Siemens 6AR1303-0AA01-0AA0 securely using standard hardware. Its light weight of 0.49 lbs simplifies handling.

Meanwhile, connect the Ethernet cable to the network port. Ensure the transmission rate is set to 10 Mbit/s on both ends. Finally, power up the system and verify communication. No special cooling is needed under normal conditions.

Packaging List

• Siemens 6AR1303-0AA01-0AA0 interface module (1 unit)

• No Ethernet cables or mounting accessories included

• No certificates or warranty documents provided

Shipping

We ship via Fedex, UPS, or DHL with real-time tracking available.

Frequently Asked Questions (FAQ)

1. Can the Siemens 6AR1303-0AA01-0AA0 run at 100 Mbit/s?
No, this interface module supports only 10 Mbit/s. Use a different model for higher speeds.

2. What happens above 1000 meters altitude?
Above 1000 meters, the Siemens 6AR1303-0AA01-0AA0 may require derating. Consult your system engineer for guidance.

3. Is this module compatible with non-Siemens Ethernet devices?
Yes, standard Ethernet protocols allow connection to most third-party devices at 10 Mbit/s.

4. Does the 80% humidity limit apply during storage?
Yes, keep storage humidity at or below 80% RH (non-condensing) to avoid internal damage.

5. How do I know if the 6AR1303-0AA01-0AA0 is working correctly?
Check the network link status and monitor data transmission. The module has no user-serviceable indicators.