Honeywell

The Honeywell TC-POB041 is a 4-channel digital output module for hazardous area applications. It delivers intrinsically safe outputs with 1ms response time. This module supports 10kHz switching frequency and includes fault detection for lead breakage and short circuits.

The Honeywell TC-POA081 is an 8-channel analog output module for industrial control. It delivers 4-20mA signals with 0.1% accuracy. This intrinsically safe unit supports lead breakage detection and fast 4ms response. Ideal for hazardous zone installations.

The Honeywell TC-PIB161 is a 16-channel digital input module for NAMUR proximity sensors and switches. It features intrinsic safety, configurable fault detection per channel group, and a fast 1ms response time. Ideal for hazardous area digital signal monitoring.

The Honeywell TC-PIL081 is an 8-channel temperature input module supporting thermocouples and RTDs. It offers configurable filter frequencies, 16-bit resolution, and intrinsic safety. Ideal for hazardous area temperature monitoring.

The Honeywell TC-PIA082 is an 8-channel analog current input module designed for 2-wire and 3-wire transmitters. It delivers 16-bit resolution and intrinsic safety for hazardous areas. This module supports lead break detection and per-channel alarms.

The Honeywell 900P01-0701 is a rugged AC power supply for extreme environments. It accepts 90 to 264V AC and delivers 41W output. With a T4 temperature rating from -40°C to 70°C, this unit handles harsh industrial conditions.

The Honeywell 900P01-0301 is a wide-input AC power supply for industrial control systems. It accepts 90 to 264 V AC and delivers 58W of output power. Test jacks for 5V and 24V simplify troubleshooting.

The Honeywell 900H32-0102 is a 32-channel digital output module for 24VDC systems. It features high-side driving, active current limiting, and galvanic isolation. This module is ideal for reliable sourcing outputs in industrial controls.

The Honeywell 900G32-0101 is a 32-channel digital input module designed for 24VDC sinking applications. It delivers reliable field signal acquisition with galvanic isolation, fast 5ms response, and wide voltage tolerance. This module suits industrial control systems needing dense, high-performance input handling.

The Honeywell TC-OAH061 is a 6-point analog output module designed for current loop signals. Each of its six channels is galvanically isolated. It outputs a 4-20 mA range with 13-bit resolution. The module updates all channels every 25 ms. You can drive loads up to 500Ω at 20.0 mA. Electronic current limiting protects against shorts.

The Honeywell TC-PIA081 is an 8-point analog current input module for 2-wire and 3-wire transmitters. It accepts 4-20mA signals with 16-bit resolution and 0.1% accuracy. This intrinsically safe module is now withdrawn and replaced by TC-PIA082. Please verify your system compatibility before ordering.

The Honeywell TC-PTBC11 is a screw-type terminal base for one I/O module. It supports intrinsically safe power supply channels and provides 52 screw terminals. This base is mechanically keyed before wiring to prevent errors. Ideal for non-hazardous and intrinsically safe applications.