The Honeywell TC-RPFM01 is a dedicated fiber module for ControlNet networks in non-hazardous areas. It works with a repeater adapter to extend communication up to 3km. This module ensures stable data transfer at 5M bit/s using 1300nm wavelength fiber optics.
The Honeywell TC-PMFO01 is a dedicated fiber module built for ControlNet networks in explosive environments. It works with a repeater adapter module and supports 62.5/125 micron fiber optics. With ST termination and a 1300nm wavelength, this unit transmits data up to 3km. Its galvanic isolation meets DIN EN 50 020 standards, making it ideal for hazardous locations like oil & gas or chemical plants.
The Honeywell TC-RPA001 is a ControlNet repeater adapter designed for non-hazardous locations. It supports two fiber modules and operates on 24Vdc nominal power. This device delivers reliable communication at 5M bit/s with full galvanic isolation between all bus interfaces.
The Honeywell TC-PBFO01 is a ControlNet repeater adapter built for hazardous locations. It supports two fiber module slots and delivers intrinsically safe communication at 5M bit/s. This device ensures reliable data transfer in explosive atmospheres with ATEX certification.
The Honeywell TC-PGCN11 is an intrinsically safe gateway module for Series C I/O systems. It supports up to 8 I/O modules. This unit provides ControlNet communication with galvanic isolation. It is certified for hazardous locations (EEx ib IIC T4).
The Honeywell TC-FOR081 is a relay digital output module with 8 Form A isolated electromechanical relays. Each channel is normally open. It supports both ac and dc loads up to 240V ac or 125V dc. This module offers high isolation and reliable switching for industrial control.
The Honeywell TC-FOD321 is a protected 24Vdc source digital output module. It offers 32 non-isolated channels arranged in two groups of 16. This DIN-rail mounted unit delivers reliable performance for industrial control systems.
The Honeywell C7061A1020 ultraviolet flame detector features an oscillating shutter for dynamic self-checking. It senses UV radiation from gas or oil flames. This model operates on 120V or 230V at 50/60Hz. The shutter mechanism interrupts UV light reaching the sensor tube. Consequently, it verifies proper detector function continuously. A field-replaceable UV sensing tube and quartz window simplify maintenance.
The Honeywell RA890G1245 Protectorelay™ primary control manages flame supervision in commercial and industrial burners. It operates on 220V at 50/60Hz. A 15-second safety switch provides lockout timing. Flame response takes only 0.8 seconds. The SPDT alarm contacts enable external alert systems. This model works with C7027, C7035, or C7044 ultraviolet flame detectors.
The Honeywell R7999A1005 ControLinks Fuel Air Controller manages ML7999 universal parallel positioning actuators. It supports 7-24 point profiles for precise fuel-air ratio tuning. A remote reset input allows external fault recovery. Its wide -40°F to 140°F ambient range ensures reliable operation in harsh boiler rooms. This model runs on 100-120VAC power.
The Honeywell 2MLR-DC42 is a reliable 24 VDC input power supply module. It delivers a regulated 5 VDC output at 7.5A. Designed for industrial automation, it includes a RUN contact and LED voltage status. Its compact dimensions and high efficiency support continuous operation in control cabinets.
The Honeywell 2MLR-AC13 is an AC input power supply module rated for 110 VAC. It delivers a stable 5 VDC output at 8.5A, providing 46.75W of power at 55℃. This module includes a RUN contact for status monitoring and an LED for voltage indication. Its compact design fits standard industrial control cabinets.
