Honeywell TC-OAV061 Analog Output Module

Honeywell TC-OAV061 Analog Output Module Overview

Engineers deploy the Honeywell TC-OAV061 when they require dependable analog control within complex industrial frameworks. Specifically, this six-point module manages voltage signals ranging up to plus or minus 10.50 VDC. Furthermore, it supports loads of 1 KΩ or larger while maintaining exceptional accuracy across all active channels.

Modern control systems demand rapid response times to maintain operational stability. Therefore, the Honeywell TC-OAV061 features a module update rate of 25 ms for all channels. Additionally, output settling takes less than 2 ms to reach 95% of the final value with resistive loads. Technicians appreciate these performance metrics because they minimize latency in critical loops.

Technical Specifications and Performance

Precision defines the operational capability of the Honeywell TC-OAV061. Specifically, the voltage resolution achieves 14 bits across 21 V, which equals 1.4 millivolts per step. Meanwhile, the output impedance remains remarkably low at less than 3 Ω.

Environmental resilience is equally crucial for industrial hardware. Consequently, the Honeywell TC-OAV061 incorporates robust output overvoltage protection rated at 24 VAC/VDC continuous at room temperature. Moreover, continuous short circuit protection utilizes electronic current limiting to prevent hardware damage during unexpected faults.

Calibrated accuracy at 25 degrees Celsius stays better than 0.1% of the total range. In addition, RFI immunity ensures errors remain below 2.0% of the range at 10 V/m between 27 to 1000 MHz. Thermal stability further enhances reliability, exhibiting an output offset drift of only 60 µV/per degree Celsius typical and a gain drift of 50 ppm/per degree Celsius typical. Power dissipation tops out at 4.9 W maximum.

Installation and Connectivity Guidelines

Proper installation guarantees the longevity of the Honeywell TC-OAV061. First, technicians must mount the module securely into compatible backplane architecture, ensuring backplane power consumption parameters are properly evaluated. Next, operators connect field wiring using the TC-TBNH 20-position terminal block.

Isolation voltage represents a vital safety feature of the Honeywell TC-OAV061. Specifically, channel-to-channel and user-to-system isolation undergo 100% testing at 2546 VDC for 1 second. Therefore, electrical safety remains uncompromised even in high-voltage industrial facilities. Always verify terminal seating before powering up the control rack.

Packaging List

• Honeywell TC-OAV061 Module

• TC-TBNH 20-Position Terminal Block

• Quick Installation Guide

FAQ

1. What is the primary function of the Honeywell TC-OAV061?

The Honeywell TC-OAV061 functions as a 6-point isolated analog output module designed to supply precise voltage signals within industrial automation networks.

2. What shipping methods are available for this module?

We ship all orders via reliable global carriers, specifically Fedex, UPS, and DHL, to ensure prompt delivery to your facility.

3. How many channels does the Honeywell TC-OAV061 support?

This specific module supports six galvanically isolated channels, allowing independent and safe signal management across different control loops.

4. What type of terminal block connects to the module?

The Honeywell TC-OAV061 utilizes the TC-TBNH 20-position terminal block for secure and organized field wiring connections.

5. Does the module feature short circuit protection?

Yes, it provides continuous open short circuit protection utilizing built-in electronic current limiting to safeguard the internal circuitry.