Siemens 6AR1303-0ED00-0AA0 Communication Module for Dual-Network Flexibility
Product Introduction
The Siemens 6AR1303-0ED00-0AA0 serves as a communication module with both PROFIBUS DP and Ethernet interfaces. It achieves a data transfer rate of up to 12 Mbit/s on the PROFIBUS DP side. For Ethernet, it supports 10/100 Mbit/s with auto-negotiation.
For instance, you can connect legacy PROFIBUS devices and modern Ethernet systems through one compact module. Additionally, the Siemens 6AR1303-0ED00-0AA0 draws only ≤2 W under full load, which keeps energy costs low. Its plug-in modular design simplifies installation and replacement.
Technical Specifications
Data Transfer Rate (PROFIBUS DP): Up to 12 Mbit/s
Ethernet Port Speed: 10/100 Mbit/s (Auto-negotiating)
Interface Configuration: PROFIBUS DP port + Ethernet port
Protocol Compliance: Supports PROFIBUS DP standards
Electrical Interface (Ethernet): RJ45 (8P8C) with Auto-MDI/MDIX
Power Requirements: 24 V DC supply
Power Consumption: ≤ 2 W (Under full load)
Electrical Isolation: Integrated signal protection
Diagnostic Indicators: LED status lights
Installation Format: Compact, plug-in modular design
This configuration bridges two major industrial networks seamlessly. Furthermore, the Auto-MDI/MDIX feature eliminates the need for crossover cables, saving you time during setup.
Mechanical and Environmental Parameters
Operating Temperature Range: -20°C to +60°C
Weight: Approximately 0.35 kg (0.77 lbs)
Protection Class: Typical for indoor industrial use
Cooling: Passive (no fan required)
Therefore, you can deploy this communication module in cold warehouses or warm production lines. However, keep the unit away from direct moisture or corrosive gases.
Installation Guidelines
First, ensure a 24 V DC power source is available near the mounting location. Next, insert the Siemens 6AR1303-0ED00-0AA0 into its designated slot using the plug-in modular design. The compact format requires minimal cabinet space.
Meanwhile, connect the PROFIBUS DP cable to the DP port. Then connect your Ethernet cable to the RJ45 connector. The Auto-MDI/MDIX function adapts to straight or crossover cables automatically. Finally, power on the unit and check the LED status lights for normal operation.
Packaging List
Siemens 6AR1303-0ED00-0AA0 communication module (1 unit)
No cables, connectors, or mounting brackets included
No certificates or warranty documents provided
Shipping
We ship via Fedex, UPS, or DHL with full tracking services.
Frequently Asked Questions (FAQ)
1. Can the Siemens 6AR1303-0ED00-0AA0 run both interfaces simultaneously?
Yes, the PROFIBUS DP and Ethernet ports operate at the same time, bridging data between both networks.
2. What do the LED indicators show?
LED status lights display power, network link activity, and data transmission health for the 6AR1303-0ED00-0AA0.
3. Does this module work with third-party PROFIBUS devices?
Yes, it complies with PROFIBUS DP standards, so it communicates with most certified PROFIBUS equipment.
4. What happens if the temperature drops below -20°C?
Below -20°C, the Siemens 6AR1303-0ED00-0AA0 may fail to operate correctly. Keep it within the rated range.
5. Is electrical isolation necessary for my application?
Integrated electrical isolation protects against ground loops and voltage spikes. We strongly recommend keeping this feature active.
