Siemens 6AR1310-0GG40-0AA0 Monitoring Relay for Current Protection
Product Introduction
The Siemens 6AR1310-0GG40-0AA0 functions as a monitoring relay within the I/O Modules product line. This digital device supports both AC currents and DC currents, which makes it highly versatile. It facilitates accurate detection of current overshoot and current undershoot, catering to diverse industrial monitoring requirements.
For instance, you can install this relay on motor feeders or power distribution panels. Additionally, the Siemens 6AR1310-0GG40-0AA0 operates on a 24V AC/DC supply, matching standard control voltages. Its compact size and light weight simplify panel integration.
Technical Specifications
Type: Monitoring Relay
Digital Device: Yes
Current Monitoring Applications: Supported
Overshoot Detection: Supported
Undershoot Detection: Supported
AC Currents: Supported
DC Currents: Supported
Voltage: 24 to 24V AC/DC (24V nominal)
Frequency: 50/60 Hz
Operating Temperature: 0°C to 40°C
Storage Temperature: 0°C to 50°C
Maximum Operating Humidity: 80% without condensation
Maximum Storage Humidity: 80% without condensation
This configuration allows the 6AR1310-0GG40-0AA0 to protect sensitive equipment from overcurrent and undercurrent faults. Furthermore, the 50/60 Hz rating means it works worldwide on standard power grids.
Mechanical and Environmental Parameters
Weight: Approximately 0.18 kg (0.40 lbs)
Housing: Standard industrial relay enclosure
Operating Temperature: 0°C to 40°C
Storage Temperature: 0°C to 50°C
Humidity Limit: 80% max, non-condensing
Mounting: DIN rail or panel mount (typical)
Therefore, you can place this monitoring relay in indoor control cabinets with moderate temperatures. However, avoid locations near heaters or outside windows that might cause condensation.
Installation Guidelines
First, ensure the 24V AC/DC power supply matches the relay's rating. Next, mount the Siemens 6AR1310-0GG40-0AA0 securely on a DIN rail inside your panel. Its lightweight design makes handling easy.
Meanwhile, connect the current-carrying conductors through the monitoring input terminals. Then set the overshoot and undershoot thresholds according to your application. The relay will trip when current exceeds or falls below these limits. Finally, test the detection function with a variable load before putting the system into production.
Packaging List
Siemens 6AR1310-0GG40-0AA0 monitoring relay (1 unit)
No mounting hardware or DIN rail clips included
No connection cables or terminal blocks provided
No certificates or warranty documents
Shipping
We ship via Fedex, UPS, or DHL with full tracking capabilities.
Frequently Asked Questions (FAQ)
1. Can the Siemens 6AR1310-0GG40-0AA0 monitor both AC and DC at the same time?
No, you must configure the 6AR1310-0GG40-0AA0 for either AC or DC monitoring per installation.
2. What happens if humidity exceeds 80% with condensation?
Condensation above 80% RH may cause internal corrosion or short circuits. Keep the environment dry.
3. Does this relay automatically reset after a fault clears?
The Siemens 6AR1310-0GG40-0AA0 typically requires manual reset or power cycling. Check your wiring configuration.
4. Can I use this monitoring relay with variable frequency drives?
Yes, but the 6AR1310-0GG40-0AA0 works best with clean 50/60 Hz waveforms. Harmonic distortion may affect accuracy.
5. What is the difference between overshoot and undershoot detection?
Overshoot detection triggers when current exceeds your set maximum. Undershoot detection triggers when current falls below your set minimum.
