The 6FX80022DC101BG0 is a premium pre-assembled signal cable from Siemens. It belongs to the MOTION-CONNECT 800PLUS family, which supports very long runs. Specifically, this cable works perfectly for SINAMICS S120 Motor Modules and SINUMERIK 840D sl controls. The DRIVE-CLiQ protocol carries both communication and 24V power in one jacket.
Additionally, this cable uses different connectors on each end. On the module side, you get a standard RJ45 IP20 plug for cabinet wiring. On the motor side, a rugged IP67 connector handles harsh environmental conditions. The total length is fixed at 6 meters, with a maximum allowed run up to 75 meters. Therefore, you can order longer versions if needed.
The 6FX80022DC101BG0 transmits DRIVE-CLiQ serial data at high speeds. It also delivers 24V DC auxiliary power for encoder electronics. This hybrid design saves panel space and reduces wiring time. Furthermore, the MOTION-CONNECT 800PLUS construction offers exceptional flexibility. It withstands millions of bending cycles for moving cable chains.
Key electrical parameters include:
Signal pairs: Shielded twisted pairs for noise immunity.
Voltage rating: 30V for signals, 48V for 24V conductors.
Current capacity: 4A maximum on power cores.
Impedance: 100 ohms differential for DRIVE-CLiQ compliance.
The module side connector is an RJ45 IP20 plug. It locks with a standard tab and fits any Ethernet port. The motor side uses an IP67 hybrid plug with a screw mechanism. Both connectors have metal shielding for EMI protection. Additionally, the outer diameter is only 7.1 mm (Dmax), which saves tray space.
This cable performs reliably in demanding factory conditions. Operating temperature ranges from -20°C to +80°C for fixed installation. For continuous flexing applications, the range is -5°C to +70°C. The minimum bending radius is 75mm for fixed runs and 120mm for moving chains.
Moreover, the 6FX80022DC101BG0 resists oils, coolants, and typical industrial chemicals. The orange PVC jacket meets UL AWM style 2464. Flame retardancy complies with VW-1 and FT2 standards. The cable also handles torsional stress up to ±180° per meter. This feature benefits robotic arms and rotating axes.
Siemens released this cable only for lengths up to 75 meters. Beyond that distance, signal integrity may degrade. The net weight is 2.463 lb, which is about 1.12 kg. Country of origin is Slovakia, ensuring consistent European manufacturing quality.
First, disconnect all power before handling the 6FX80022DC101BG0. Next, route this cable away from high-power motor cables. Keep at least 200mm separation to avoid electromagnetic interference. For the IP67 end, fully tighten the coupling nut to 1.5 Nm torque. Do not exceed 2.0 Nm, or you may damage the rubber seal.
Additionally, avoid bending the cable within 50mm of either connector. This practice prevents internal conductor breakage. Use only plastic cable ties, and do not overtighten them. Metal ties can cut through the jacket over time. For the RJ45 end, ensure the tab clicks securely into the port.
Finally, verify continuity using a pinout check:
Pins 1 & 2: DRIVE-CLiQ data pair A
Pins 3 & 6: DRIVE-CLiQ data pair B
Pins 4 & 5: 24V+ and 0V
Shield: Connected to metal shell.
1 x 6FX80022DC101BG0 pre-assembled signal cable (6 meters)
2 x protective caps (one for each connector type)
1 x cable identification label
1 x quick-start installation guide
Note: No calibration certificate or warranty document is included.
We ship this item via FedEx, UPS, or DHL from our regional warehouse. Standard lead time ex-works is 15 days. Tracking number provided within 24 hours after dispatch. Express delivery typically takes 3-5 business days worldwide.
1. Can I use the 6FX80022DC101BG0 beyond 75 meters?
No, Siemens released this cable only up to 75 meters. Longer runs may cause signal reflection and communication errors.
2. What is the difference between MOTION-CONNECT 800PLUS and 500?
800PLUS offers higher flexibility and longer allowable lengths (75m vs 50m). It also has a smaller bending radius for tight spaces.
3. Is the RJ45 end compatible with standard Ethernet switches?
No, DRIVE-CLiQ uses a proprietary protocol. Do not plug it into standard network switches. It only works with Siemens DRIVE-CLiQ ports.
4. Does the 6FX80022DC101BG0 include 24V power for the encoder?
Yes, it carries both data and 24V power on separate pairs. Maximum current is 4A at 24V DC.
5. Can I cut and re-terminate this cable myself?
No, Siemens does not recommend field termination. The impedance matching and shielding are factory-tuned. Order the exact length you need.
| Brand Name | Siemens |
| Model No. | 6FX8002-2DC10-1BG0 |
| Product Type | Signal Cable |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
