The 6FX50022DC101BF0 is a genuine Siemens MOTION-CONNECT 500 signal cable. Factories pre-assemble it to save your installation time. Moreover, this cable supports the DRIVE-CLiQ interface with integrated 24V lines. You can use it for SINAMICS S120 Motor Modules and SINUMERIK 840D sl controls. Its hybrid design combines communication and low voltage power in one jacket. Therefore, you reduce wiring errors and panel space.
Specifically, this part number replaces 6FX5002-2DC10 with a fixed 5-meter length. The cable ends have mixed IP20 (internal) and IP67 (external) rated connectors. This flexibility works for cabinet-to-motor routing. Additionally, it meets RoHS since 2006, confirming restricted substance compliance. You get a ready-to-use assembly without crimping or pin insertion.
The 6FX50022DC101BF0 carries DRIVE-CLiQ serial communication signals. It also transmits 24V DC auxiliary power for encoder electronics. This combined capability reduces separate power cable needs. Furthermore, the cable uses MOTION-CONNECT 500 construction. That means high flexibility and oil resistance for moving machine parts.
Key electrical parameters include:
Signal pairs: Shielded twisted pairs for noise immunity.
Voltage rating: 30V for signals, 48V for 24V conductors.
Current capacity: 4A maximum on power cores.
Conductor material: Fine-stranded bare copper.
The connector at one end is an IP20 plug (inside cabinet). The other end uses an IP67 hybrid plug (near motor or encoder). Both connectors lock securely via a screw mechanism. They also have metal housings for EMI shielding. Additionally, the cable jacket is orange PVC, which is standard for Siemens DRIVE-CLiQ.
This cable performs well in industrial environments. Operating temperature ranges from -20°C to +80°C. It remains flexible down to -5°C for mobile applications. The bending radius is 75mm for fixed installation and 120mm for continuous flexing.
Moreover, the 6FX50022DC101BF0 resists common coolants and lubricants. The outer jacket has UL AWM style 2464 approval. Flame retardancy meets VW-1 and FT2 standards. The cable also withstands torsional stress up to ±180°/meter. This feature matters for rotary axes or robotic arms.
Tensile load should stay below 150N during installation. The net weight is exactly 2.760 lb or about 1.25 kg. Its country of origin is Slovakia, where Siemens runs a certified factory. Therefore, you get consistent European quality.
First, always disconnect power before handling the 6FX50022DC101BF0. Next, route the cable separately from high-power motor cables (above 100A). Keep at least 200mm distance to avoid EMI interference. Use the supplied metal connector caps to protect unplugged ends from dust.
For IP67 sealing, fully tighten the coupling nut to 1.5 Nm torque. Do not exceed 2.0 Nm, or you may damage the seal. Additionally, do not bend the cable within 50mm of either connector. This strain relief practice prevents internal wire breakage. You can cut cable ties loosely; overtightening deforms the jacket.
Finally, verify continuity using a multimeter on pin assignments:
Pin 1: 24V+
Pin 2: 0V
Pins 3 & 4: DRIVE-CLiQ data pair
Shield: Connected to metal shell.
1 x 6FX50022DC101BF0 pre-assembled signal cable (5 meters)
2 x protective caps for IP20 connectors
1 x cable tie with mounting hole
1 x quick-start leaflet (multilingual)
Note: No calibration certificate or warranty document is included.
We ship this item via FedEx, UPS, or DHL from our regional warehouse. Standard lead time ex-works is 15 days. Tracking number provided within 24 hours after dispatch. Express delivery typically takes 3-5 business days worldwide.
1. Can I use the 6FX50022DC101BF0 with a third-party drive?
No, this cable works only with Siemens DRIVE-CLiQ interfaces. Third-party drives do not support the communication protocol.
2. What is the difference between MOTION-CONNECT 500 and 300?
MOTION-CONNECT 500 offers higher flexing cycles (5 million vs 3 million) and better oil resistance. It suits dynamic applications like linear motors or gantries.
3. How do I extend this cable beyond 5 meters?
Siemens does not recommend extending it. Instead, buy a longer pre-assembled version (e.g., 10m or 15m). Signal integrity degrades with splices.
4. Does the 6FX50022DC101BF0 include 24V power for the encoder?
Yes, it contains two dedicated 24V wires. They supply encoder electronics without an external power source. Maximum current is 4A.
5. Is this cable suitable for underground or outdoor burial?
No, it lacks UV and moisture block layers. Use it only indoors, inside cable trays or conduits. Outdoor use requires additional protection.
| Brand Name | Siemens |
| Model No. | 6FX5002-2DC10-1BF0 |
| Product Type | Signal Cable |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
