Siemens 6FX80022DC101BE0 DRIVE-CLiQ Signal Cable

Siemens 6FX80022DC101BE0 DRIVE-CLiQ Signal Cable

Product Introduction

The Siemens 6FX80022DC101BE0 is a pre-assembled signal cable for DRIVE-CLiQ systems. It provides reliable communication between a SINAMICS S120 module and a compatible motor. This cable uses a standard RJ45 plug on the module side with IP20 protection. On the motor side, you will find a rugged connector rated IP67, which resists water and dust.

Additionally, this cable belongs to the MOTION-CONNECT 800PLUS series. Therefore, it supports high mechanical stress and dynamic movement. Siemens restricts this series to a maximum approved length of 75 meters. The specific variant 6FX80022DC101BE0 has a fixed length of 14 meters. Its compact outer diameter of 7.1 mm allows for flexible routing in tight spaces.

Technical Specifications

• Product Article Number: 6FX80022DC101BE0 (Type 6FX8002-2DC10)

• Connector (module side): RJ45, IP20

• Connector (motor side): IP67 with 24 V supply

• Cable family: MOTION-CONNECT 800PLUS

• Maximum approved length: 75 m (this unit: 14 m)

• Outer diameter (Dmax): 7.1 mm

• Net weight: 2.163 lb

• Commodity code: 85444290

• UPC: 662643414202

• Country of origin: Slovakia

• WEEE take-back obligation: Yes

Furthermore, this cable supports the DRIVE-CLiQ protocol for real-time communication. It also carries 24 V power for encoder electronics.

Mechanical & Environmental Data

The Siemens 6FX8002-2DC10 pre-assembled cable resists vibration and bending. MOTION-CONNECT 800PLUS cables suit dynamic applications like cable carriers or robotic arms. Meanwhile, the IP67 rating on the motor side protects against immersion. The IP20 connector on the module side fits standard control cabinets.

Moreover, the small 7.1 mm diameter reduces space requirements. However, you must not exceed the 75 m approved length. Exceeding this limit may cause signal degradation or communication errors.

Installation Guidelines

First, ensure both devices are powered off completely. Next, connect the RJ45 IP20 plug to the DRIVE-CLiQ port on the SINAMICS S120 module. Then, attach the IP67 connector firmly to the motor side until it locks.

For a successful installation, follow these key points:

• Do not bend the cable below its minimum radius.

• Secure the IP67 connector with its locking mechanism.

• Keep the cable away from sharp edges and hot surfaces.

• Use only this 6FX80022DC101BE0 cable for long DRIVE-CLiQ links.

Finally, test the communication via the SINUMERIK 840D sl control panel.

Packaging List

• 1 x Pre-assembled signal cable 6FX80022DC101BE0 (14 m length)

• No additional mounting accessories

• No certificates or warranty documents inside the box

Shipping Information

We ship globally using these trusted carriers:

• FedEx

• UPS

• DHL

Standard lead time ex-works is 15 days.

Frequently Asked Questions (FAQ)

1. Can I use this cable for lengths longer than 75 meters?
No. Siemens released the MOTION-CONNECT 800PLUS series only up to 75 m. Longer distances will likely cause signal loss.

2. Is the 6FX80022DC101BE0 compatible with older SINUMERIK models?
This cable works with SINUMERIK 840D sl and SINAMICS S120 Motor Modules. Both must have DRIVE-CLiQ ports. Check your device manual first.

3. Does the IP67 connector require special tools for assembly?
No. The Siemens 6FX8002-2DC10 comes pre-assembled. You simply plug it in and lock it by hand. No crimping or soldering is needed.

4. What is the difference between MOTION-CONNECT 800PLUS and 500?
The 800PLUS series supports higher mechanical stress and dynamic movements. Use it for robotic axes or moving cable carriers. The 500 series suits static installations.

5. How do I confirm the exact length of my 6FX80022DC101BE0 cable?
The length is encoded in the order number suffix (+0+10+4+0 = 14 m). You can also measure it physically. Contact us for custom lengths within the 75 m limit.