Siemens 6FX8002-2DC10-1BB0 DRIVE-CLiQ Cable

Siemens 6FX8002-2DC10-1BB0 Pre-Assembled Signal Cable

Product Introduction

The Siemens 6FX8002-2DC10-1BB0 is a pre-assembled signal cable for DRIVE-CLiQ systems. This cable belongs to the MOTION-CONNECT 800PLUS family. It delivers robust communication between a drive controller and a motor. On the module side, you get an RJ45 connector with a 24 V plug rated IP20. On the motor side, the connector achieves an IP67 rating. Therefore, it handles harsh environments well.

Additionally, Siemens limits the approved length for this series to 75 m maximum. The specific model 6FX8002-2DC10-1BB0 has a fixed length of 10 m. Its outer diameter measures only 7.1 mm. This compact design saves space in cable trays. The pre-assembled nature reduces installation errors and saves labor time.

Technical Specifications

• Cable type: DRIVE-CLiQ signal cable with 24 V supply

• Connector module side: RJ45, IP20, integrated 24 V plug

• Connector motor side: IP67 rated, suitable for wet/dusty areas

• Motion-Connect standard: 800PLUS (high bending and torsion resistance)

• Maximum approved length: 75 m for the whole series

• Actual length (m): 10 (tolerance +0 / +10 / +1 / +0)

• Outer diameter (Dmax): 7.1 mm

• Net weight: 0.777 kg per piece

• Packaging unit: 1 piece

• Country of origin: Slovakia

• Commodity code: 85444290

• EAN: 4042948664551

• UPC: 662643238983

Mechanical & Environmental Parameters

This cable works inside industrial control cabinets and on moving machine parts. MOTION-CONNECT 800PLUS guarantees high flexibility. It resists oil, coolant, and mechanical wear. Use it for drag chains or torsion applications. The IP67 motor-side connector allows direct connection to motors exposed to washdown or dust.

Meanwhile, the IP20 module side stays inside the control cabinet. Thus, you only need protection from dust and accidental contact indoors. The small bending radius follows standard Siemens DRIVE-CLiQ rules.

Installation Guidelines

First, verify the cable length. The Siemens 6FX8002-2DC10-1BB0 offers exactly 10 m. Next, check both connectors for damage before installation. Plug the RJ45 with 24 V into the drive's DRIVE-CLiQ socket. Then, tighten the IP67 connector on the motor side until it clicks.

Furthermore, avoid sharp edges during routing. Use cable ducts with sufficient clearance. For moving applications, follow the minimum bend radius from the MOTION-CONNECT 800PLUS datasheet. Finally, secure the cable loosely to prevent tension on the connectors.

Packaging List

• 1 x Pre-assembled signal cable 6FX8002-2DC10-1BB0 (length 10 m)

• 1 x RJ45 connector (module side, pre-attached)

• 1 x IP67 connector (motor side, pre-attached)

Note: No certificates or warranty documents are included. Shipping via Fedex, UPS, or DHL.

Frequently Asked Questions (FAQ)

1. Can I use the 6FX8002-2DC10-1BB0 for longer than 75 m?
No. Siemens releases this DRIVE-CLiQ cable only up to 75 m. Longer lengths cause signal degradation.

2. Is the 24 V supply integrated into the RJ45 connector?
Yes. The module side of the Siemens 6FX8002-2DC10-1BB0 includes a 24 V plug inside the RJ45 housing.

3. What is the difference between MOTION-CONNECT 800 and 800PLUS?
800PLUS offers higher bending cycles and better torsion resistance. For static applications, 800 is acceptable. For robotics or drag chains, choose MOTION-CONNECT 800PLUS like this model.

4. Can I cut and re-terminate this pre-assembled cable?
No. Pre-assembled DRIVE-CLiQ cables use factory-tuned impedance. Cutting will break the 24 V circuit and signal integrity. Order a custom length instead.

5. Which Siemens drive families support this cable?
This cable works with SINAMICS S120 and SINUMERIK 840D sl systems. It also fits other DRIVE-CLiQ-compatible drives from Siemens.