This Siemens pre-assembled DRIVE-CLiQ cable connects the module side (IP20 RJ45 with 24V plug) to the motor side (IP67). It supports MOTION-CONNECT 800PLUS and is approved for lengths up to 75 meters. The cable diameter is 7.1 mm.
This Siemens DRIVE-CLiQ signal cable links modules to motors. It uses an RJ45 IP20 connector on the module side. On the motor side, it features an IP67-rated plug. The cable belongs to the MOTION-CONNECT 800PLUS family. Siemens approves this series for lengths up to 75 meters. The outer diameter measures 7.1 mm.
This high-performance signal cable supports DRIVE-CLiQ with 24V. It uses RJ45 IP20 on the module side and IP67 on the motor side. The MOTION-CONNECT 800PLUS design allows lengths up to 75m. Ideal for SINAMICS S120 systems.
This pre-assembled signal cable connects drives to controllers. It supports DRIVE-CLiQ protocol with 24V power. The 5-meter length fits many machine layouts. Ideal for SINAMICS S120 systems.
The DS3800NVMB1A1A is a Voltage Monitor Board from GE for the Mark V Speedtronic system. This board monitors voltage conditions in turbine control applications. It weighs 0.8 kg and is manufactured in the United States.
The IS420YDOAS1B is a Discrete Output I/O Pack from GE for the Mark VIeS control system. It controls up to 12 relays with coil monitoring. This unit operates from -40 to 158°F and supports simplex or TMR redundancy. Its response time is only 6 ms.
The IS420YAICS1B is an Analog I/O Module from GE for the Mark VIeS control system. It supports ten analog inputs with a 16-bit ADC. This unit operates from -40 to 158°F and uses dual RJ-45 Ethernet networks. It is compatible with TMR or simplex redundancy.
The IS420YDIAS1B is a GE discrete contact I/O module for the Mark VIeS safety system. It provides 24 contact inputs with 1500V isolation. This I/O pack connects to dual Ethernet networks and supports simplex or TMR configurations. Visual diagnostics come through indicator LEDs, while the module operates reliably from -40°C to 70°C.
The IS420UCSCS2A is a GE dual-core controller module for the Mark VIeS safety system. It runs on QNX Neutrino OS and supports functional safety loops up to SIL 2 and SIL 3 capabilities. This compact controller requires no battery, fan, or jumpers. It handles simplex, dual, and TMR redundancy configurations for gas turbines, steam turbines, wind turbines, and combined-cycle power plants.
The IS220PSCAH1A is a GE Serial Modbus Communication I/O Module for the Mark VIe series. It provides six configurable serial transceiver channels supporting RS232, RS422, and RS485 half-duplex standards. Dual RJ-45 Ethernet ports enable network connectivity, while a 3-pin power input accepts 24/28 VDC. This module suits gas turbine control systems and safety-critical applications.
The IS220PAICH1A is a GE Analog I/O Pack from the Mark VI series. It provides 12 channels with 10 inputs and 2 outputs. This module operates on 28 VDC and supports both simplex and TMR architectures. Additionally, it carries hazardous location certifications for versatile deployment
The IS200EPDMG1BAA is a GE Exciter Power Distribution Module within the EX2100 series. It receives 125V dc from a station battery and accepts up to two 120V ac backup inputs. This module distributes filtered power to multiple exciter boards, featuring fuses, switches, and LED indicators for reliable control.
