The Allen-Bradley 1791-8BC is a 16-point combination discrete I/O module from the Block I/O series. It provides eight 24VDC input channels and eight 24VDC output channels. This rackless module supports DIN rail mounting and communicates via Remote I/O (RIO) protocol. You can use it with legacy PLCs or modern Logix controllers through a RIO scanner.
The Allen-Bradley 1791-8AR is a compact Block I/O module with a built-in power supply and Remote I/O (RIO) interface. It offers eight 120VAC input channels and eight relay output channels. You can use this device to build distributed I/O architectures with legacy PLCs. It supports high-speed RIO communication up to 230.4K baud.
The GE IS200TBTCH1CBB is a Thermocouple Input Terminal Board for Mark VIe systems. It accepts 24 thermocouple inputs from types E, J, K, S, or T. This board works with PTCC I/O packs and supports simplex, dual, and TMR configurations. Ideal for turbine temperature monitoring.
The GE IS200TTURH1BEC is a Primary Protection Input Board from the Mark VI series. It monitors turbine speed, generator voltage, and bus voltage. This board also provides a 125V dc output for main breaker control. Ideal for simplex and TMR systems.
The IS200TRTDH1CCC is a resistance temperature device terminal board from GE for the Mark VI control system. It accepts 16 three-wire RTD inputs wired to two barrier terminal blocks. This board includes advanced noise suppression circuitry against surges and high-frequency noise. It supports multiple RTD types including platinum, copper, and nickel sensors.
The IS200TBAIH1CCC is an analog input terminal board from GE for the Mark VIe control system. It accepts 10 analog inputs and delivers 2 analog outputs. This board supports two-wire, three-wire, four-wire, or externally powered transmitters. It also handles TMR configurations and includes built-in noise suppression for reliable signal transmission.
The IS200TBCIH1BBC is a contact input terminal board from GE for the Mark VI series. It manages 24 dry contact inputs with built-in noise suppression. This board supports both simplex and Triple Modular Redundant (TMR) configurations. It connects directly to VCCC or VCRC processor boards inside the VME rack.
The IS215UCCCM04A from GE is a VME controller card for the Mark VIe gas turbine control system. This module assembly includes the IS215UCCC H4 board with 128MB flash memory and 256MB DRAM. It also features the IS200 EPMC daughter board. The faceplate provides six Ethernet-type ports with clear labeling for each port's intended use.
The IS220PVIBH1AL from GE is a vibration monitor (PVIB) pack for the Mark VIe control system. It connects one or two I/O Ethernet networks to a TVBA vibration terminal board. This pack reads vibration and proximity data from multiple sensor types across thirteen channels. Dual RJ45 ports and a 3-pin power input provide connectivity.
The IS220PPROS1B from GE is an emergency turbine protection I/O pack for the Mark VIe series. It provides backup overspeed protection and generator sync checking. This pack works as an independent watchdog for the primary control. Three TMR packs mount on a simplex SPRO terminal board for a complete protection system.
The IS220PSVOH1B from GE is a servo interface I/O pack for the Mark VIe control system. It connects one or two Ethernet networks to a TSVO servo terminal board. This pack uses a WSVO servo driver module to manage two servo valve position loops. Front panel LEDs show network status, power, and attention signals.
The IS215VCMIH2CC from GE is a bus master controller module within the Mark VI series. It manages VME bus communication, assigns board IDs, and links the main controller with I/O boards. This 6U VME board uses a Texas Instruments DSP for reliable industrial control tasks.
