GE IS215UCCCM04A VME Controller

IS215UCCCM04A GE Mark VIe VME Controller

Product Introduction

The IS215UCCCM04A serves as a powerful VME controller within the GE Speedtronic Mark VIe gas turbine control system. This board is sometimes known as a CPCI 3U compact PCI module. The assembly includes the IS215UCCC H4 board combined with 128 MB of flash memory and 256 MB of DRAM. It also features the IS200 EPMC daughter board. Therefore, this controller offers substantial processing power for turbine management applications.

The IS215UCCCM04A works with gas, steam, and wind turbine automated drive assemblies. This represents a significant improvement over the earlier Mark V series. The Mark VI series added wind turbine applications to the existing gas and steam turbine capabilities.

Technical Specifications

The IS215UCCCM04A operates at 1,600 MHz. Its power requirements are clearly defined. For the +5V dc supply, you need +5% and -3% tolerance. Typical current draw is 4.5A with a maximum of 6.75A. For the +3.3V dc supply, typical current draw is 1.5A with a maximum of 2.0A. The +12V dc supply requires only 50mA maximum.

The board includes a 128 MB SD card with its own protective case. You can slide the card into this case for safe storage. The functional acronym for this product is UCCC, which stands for Compact PCI Controller Board. The M04 in the part number indicates the specific PCB coating style. The functional revision is 1A.

Faceplate and Physical Features

The front faceplate of the IS215UCCCM04A contains six Ethernet-type ports. Each port has clear labeling showing its intended use. Additionally, the faceplate includes several LEDs for status indication. A small reset button sits at the bottom of the faceplate. This button lets you restart the controller without removing power.

Two large clasps on either end of the faceplate secure the card in place. A male terminal on the back of the circuit board also helps lock the IS215UCCCM04A into its chassis. This dual-locking mechanism ensures reliable operation even in high-vibration environments.

Cooling and Interference Protection

The IS215UCCCM04A includes a large black component with slits. This component helps cool the board during operation. Cooling is essential because the controller handles intensive processing tasks. Furthermore, the board includes multiple interference suppressors. These suppressors block external electrical interference from sources such as radios and cell phones. Consequently, the IS215UCCCM04A runs smoothly even in electrically noisy industrial environments.

Capacitors and Resistors

The IS215UCCCM04A employs a variety of capacitor types. These capacitors store energy for later use by the circuit board. When the board needs to release unused energy, it directs that energy to its resistors. This energy management system helps protect sensitive components from voltage spikes.

Microchips and Processing

Numerous microchips populate the IS215UCCCM04A controller. These microchips store data and conditions that control the circuit board as a whole. You can think of the integrated circuits as the brains of the circuit board. They execute the control algorithms that manage turbine operations.

Installation Guidelines

First, power down the VME chassis completely. Next, align the IS215UCCCM04A with an available VME slot. Push the board gently until the male terminal on the back engages with the backplane connector. Then, press the two large clasps on the faceplate to lock the card securely. After that, connect the required Ethernet cables to the six ports as labeled. Finally, power up the system and verify that the controller boots correctly.

Memory Configuration

The IS215UCCCM04A offers substantial memory resources for complex control applications. The 128 MB of flash memory stores firmware and application code. The 256 MB of DRAM provides working memory for real-time processing. Additionally, the separate 128 MB SD card offers removable storage for data logging or configuration backups.

Replacement and Availability

The IS215UCCCM04A reached last-time buy status in 2011. GE officially replaced it with the IS420UCSBH3A board. However, the replacement board comes at significantly higher cost. Therefore, our surplus and reconditioned original stock offers a more cost-effective alternative. We invite you to contact us for a current price quote.

Packaging List

• IS215UCCCM04A VME controller board (1 unit)

• Anti-static protective bag (1 piece)

• 128 MB SD card with protective case (1 unit)

• Quick installation reference card (1 copy)

Shipping Information

We ship the IS215UCCCM04A using FedEx, UPS, or DHL. All shipments include tracking numbers and full insurance. Typical delivery takes 3 to 7 business days depending on your destination.

Frequently Asked Questions (FAQ)

1. What systems is the IS215UCCCM04A compatible with?
The IS215UCCCM04A works with GE Mark VIe turbine control systems. It supports gas, steam, and wind turbine applications.

2. Can I still buy a new IS215UCCCM04A from GE?
No. The IS215UCCCM04A reached last-time buy status in 2011. GE now recommends the IS420UCSBH3A as a replacement. However, we offer surplus and reconditioned units.

3. What is the purpose of the six Ethernet ports on the faceplate?
Each port on the IS215UCCCM04A has a specific labeled function. These ports connect to I/O networks, service tools, and other system components.

4. How do I reset the IS215UCCCM04A if it freezes?
Press the small reset button located at the bottom of the faceplate. This will restart the IS215UCCCM04A without requiring a full power cycle.

5. What does the M04 coating style mean for this board?
The M04 designation on the IS215UCCCM04A indicates a specialized PCB protective coating. This coating helps protect the board from moisture, dust, and chemical exposure in industrial environments.