The 9571-20 is a 20-foot interconnect cable from Bently Nevada. It uses a two-conductor twisted and shielded 22 AWG wire. One end has a moisture-resistant female connector with two sockets. The other end has terminal lugs. This cable ensures reliable signal transmission for monitoring systems.
The Bently Nevada AP3500S2-Z1 is a side exit piezoelectric accelerometer with 500 mV/g sensitivity. It measures vibration up to 10g peak and operates from -50°C to 120°C. The hermetic 316L stainless steel housing suits harsh industrial environments.
This Vibro-Meter accelerometer delivers reliable vibration sensing for industrial monitoring. It features a 500 mV/g sensitivity and a 10 g peak acceleration range. Ideal for predictive maintenance on rotating machinery.
The Bently Nevada 330881-28-04-045-03-02 is a PROXPAC XL proximity transducer system with a 40 mm standoff adapter. It features a 3300 XL 8 mm probe and 45 mm penetration length. This sensor provides accurate vibration and position monitoring for industrial rotating machinery.
The Bently Nevada 330881-28-00-075-03-02 is a PROXPAC XL proximity transducer system without a standoff adapter. It features a 3300 XL 8 mm probe with a 75 mm penetration length. This sensor delivers reliable vibration and position monitoring for industrial machinery.
The Bently Nevada 330881-28-06-155-03-02 is a complete PROXPAC XL proximity transducer system. It includes an 8 mm probe with multiple approvals. This sensor monitors vibration and position in industrial machinery.
This Bently Nevada 330425-02-00 accelerometer features an M8x1 integral mounting stud for metric installations. It delivers a 100 mV/g sensitivity with ±5% accuracy. The hermetically sealed 316L stainless steel case meets IP68 requirements. You can rely on its wide frequency response from 10 Hz to 15 kHz for rotating machinery protection.
This Bently Nevada 330425-01-CN accelerometer delivers reliable vibration measurement for rotating machinery. It offers a 100 mV/g sensitivity and a 10 Hz to 15 kHz frequency response. The hermetically sealed 316L stainless steel case withstands harsh industrial environments. Moreover, its low base strain sensitivity ensures accurate data.
The Bently Nevada 330425-01-05 is a high-performance accelerometer for vibration monitoring. It offers a sensitivity of 10.2 mV/m/s² and a measurement range up to 490 m/s². Designed with multiple agency approvals, this sensor suits demanding industrial environments.
The Bently Nevada 330400-02-00 is a rugged piezoelectric accelerometer for industrial vibration monitoring. It offers 10.2 mV/m/s² (100 mV/g) sensitivity with ±5% accuracy. This sensor measures 490 m/s² (50 g) peak from 10 Hz to 15 kHz. Its 316L stainless steel case delivers IP68 protection for harsh environments. Note this version has no agency approvals.
The Bently Nevada 330400-02-RU is a high-performance piezoelectric accelerometer for industrial vibration monitoring. It delivers a sensitivity of 10.2 mV/m/s² (100 mV/g) with ±5% accuracy. This sensor handles 490 m/s² (50 g) peak acceleration from 10 Hz to 15 kHz. Its rugged 316L stainless steel case withstands extreme temperatures and harsh environments.
The Bently Nevada 330500-08-02 is a hermetically-sealed piezo-velocity sensor for rotating machinery. It features a 1/2-13 UNC mounting thread and ATEX hazardous area approval. This sensor delivers stable velocity measurements from -55°C to 121°C.
