Bently Nevada 9571-20 Interconnect Cable 20ft

Bently Nevada 9571-20 Interconnect Cable 20ft

Product Introduction

The 9571-20 belongs to Bently Nevada’s Standard Interconnect Cables series. This model provides a secure connection between sensors and monitoring devices. Many industrial automation systems rely on this cable for accurate data transfer. Its 20-foot length offers flexibility for various installation layouts. The cable uses high-quality materials to resist moisture and electrical interference.

Technical Specifications

This cable features a two-conductor twisted pair design. Each conductor uses 22 AWG stranded wire for flexibility and durability. An overall shield reduces electromagnetic interference. As a result, signal integrity remains strong even in noisy environments.

One end includes a two-socket moisture-resistant female connector. This connector prevents humidity from degrading the connection. The other end has terminal lugs for easy termination. Therefore, field installation becomes straightforward.

Specifically, the 9571-20 works well with Bently Nevada proximity probes and monitors. The cable length measures exactly 20 feet (approximately 6.1 meters). Twisted pair construction minimizes crosstalk between conductors. Additionally, the shielded jacket protects against external noise sources.

Furthermore, the operating temperature range spans -40°C to +105°C. This wide range allows deployment in harsh industrial settings. The insulation material resists oil, chemicals, and abrasion. Meanwhile, the outer jacket remains flexible even at low temperatures.

Mechanical & Environmental Parameters

Installation Guidelines

First, inspect the 9571-20 for any shipping damage before installation. Ensure both the female connector and terminal lugs appear clean and undamaged.

Next, connect the two-socket moisture-resistant female end to the compatible Bently Nevada sensor or monitor. Push firmly until the connector locks into place. Then, attach the terminal lugs to the appropriate terminals on your monitoring device. Tighten each lug securely to avoid loose connections.

For best performance, route the cable away from high-voltage power lines. Maintain a separation distance of at least 12 inches. Use cable ties to secure the 9571-20 along its path. Avoid sharp bends that might damage the shield or conductors.

Finally, perform a continuity check after installation. Verify that each conductor connects correctly. This step prevents signal loss or false readings.

Packaging List

• One 9571-20 Bently Nevada interconnect cable (20 ft)

• Two pre-attached terminal lugs

• Moisture-resistant female connector (factory assembled)

• Anti-static anti-dust plastic bag

Note: No certificate or warranty document is included in the package.

Shipping Methods

We ship all orders via Fedex, UPS, or DHL. Tracking numbers will be provided within 24 hours after dispatch.

Frequently Asked Questions (FAQ)

1. Can I use the 9571-20 with non-Bently Nevada sensors?
Technically yes, but performance may vary. The connector and impedance are optimized for Bently Nevada equipment. For best results, pair it with original Bently Nevada proximity probes and monitors.

2. Is the 9571-20 suitable for outdoor installations?
Yes, but you must protect the connector from direct water immersion. The moisture-resistant female connector handles humidity and splashes, but it is not submersible. Use additional conduit or junction boxes for outdoor exposed runs.

3. How do I clean the connector if it gets dirty?
Use a soft brush or compressed air to remove dust. Avoid liquid cleaners near the socket contacts. If necessary, use isopropyl alcohol on a swab and let it dry completely before reconnecting.

4. What is the maximum recommended cable length for signal integrity?
For most Bently Nevada monitoring systems, 20 feet is well within the safe limit. Longer cables (up to 1,000 ft) may work but require careful shielding and grounding. Always refer to your monitor’s manual for exact length specifications.

5. Does this cable come with a warranty from the factory?
The factory provides a 12-month warranty for manufacturing defects. However, the packaging list does not include the warranty certificate. Please contact your distributor for warranty claims and proof of purchase.