The Bently Nevada 330876-02-50-00-00 is a 3300 XL 50 mm proximity probe for extreme steam turbine environments. It operates continuously at 200°C with high-temperature FluidLoc cable. This 5.0 meter probe works exclusively with the five meter Proximitor Sensor.
The Bently Nevada 330876-02-10-01-05 is a 3300 XL 50 mm proximity probe for harsh steam turbine environments. It operates continuously at 200°C with high-temperature FluidLoc cable and armored protection. This model includes M14x1.5 threads and multiple agency approvals.
The Bently Nevada 990-04-50-03-05 is a 2-wire loop-powered vibration transmitter. It accepts one 3300 NSv proximity probe and provides a 4-20 mA output proportional to vibration. This model features DIN clip mounting and full hazardous area approvals.
The Bently Nevada 990-04-50-02-05 is a 2-wire vibration transmitter for non-contacting proximity probe input. It provides a 4-20 mA signal proportional to vibration amplitude. This model supports full-scale 0-4 mils pp, 5.0m system length, and hazardous area approvals.
This Bently Nevada 991-06-50-01-01 thrust transmitter carries CSA Division 2 approval for hazardous locations. It measures axial displacement with a 4-20 mA output. The device accepts a 3300 NSv proximity probe. Mounting uses 35 mm DIN-rail clips. Ideal for refineries and chemical plants.
This Bently Nevada 991-06-50-03-00 thrust transmitter measures axial displacement with a 4-20 mA output. It accepts a 3300 NSv proximity probe. The device offers a 0.6-0-0.6 mm full-scale range. Mounting uses DIN clips and screws. Perfect for turbine thrust position monitoring.
This Bently Nevada 991-06-50-02-00 Thrust Transmitter measures axial vibration with a 4-20 mA output. It accepts a 3300 NSv proximity probe. The device supports a 0.6-0-0.6 mm linear range. Its compact design mounts on a DIN rail. Ideal for turbine and compressor monitoring.
The Bently Nevada 177230-02-02-05 is a hazardous-area approved seismic transmitter. It measures peak vibration velocity from 0 to 50.8 mm/s. Frequency response starts at 3 Hz for low-speed machinery. The 4-20 mA loop output connects directly to PLCs, DCS, or SCADA. Its 316L stainless steel housing ensures durability in harsh environments.
This Bently Nevada 177230-01-01-CN is a rugged seismic transmitter built for industrial vibration monitoring. It converts RMS velocity into a 4-20 mA signal. The device uses a 316L stainless steel housing. It supports a 10 Hz to 1 kHz frequency range. Perfect for PLCs, DCS, and SCADA systems.
The Bently Nevada 3500/50M-01-00 286566-02 is a two-channel tachometer module. It accepts proximity probe or magnetic pickup signals. This module provides speed measurement, RPM accuracy, and recorder outputs for turbine and compressor monitoring.
The Bently Nevada 3500/92-04-01-00 136188-02 is an Ethernet and RS485 Modbus I/O module. It collects data from other 3500 rack modules via a high-speed internal network. This module supports Modbus/TCP and Modbus RTU protocols.
The Bently Nevada 3500/53-03-00 is a three-channel electronic overspeed detection system. It accepts proximity probe or magnetic pickup inputs. This module provides relay outputs for critical turbine and compressor overspeed protection.
