anuc A06B-6047-H040 Servo Axis Drive for CNC Systems

It has a net weight of 19.00 lbs, equivalent to 8.62 kg, ensuring stable mounting in standard control cabinets.

This unit supports both DC 10 and DC 20 servo amplifier options for flexible system configuration.

It provides complete velocity control to adjust motion speed accurately in different machining processes.

The drive also supports acceleration control for smooth and steady movement during machine operation.

Real-time feedback function helps users monitor working status and maintain consistent performance.

The plug-and-play design reduces setup time and simplifies integration with existing CNC equipment.

It can resist a maximum vibration of 5G to stay reliable in harsh industrial environments.

The maximum allowed operating altitude is 1000 meters above sea level for broad deployment.

These environmental parameters make the drive suitable for most factory and automation installation sites.

No extra cooling or protection is needed under normal working conditions within these limits.

Ensure the mounting location does not exceed 1000 meters altitude or 5G continuous vibration during operation.

Place the drive in a well-ventilated cabinet to avoid overheating and maintain long-term performance.

Connect the unit to either DC 10 or DC 20 servo amplifiers based on your CNC system requirements.

Use the plug-and-play interface to link the drive with the main controller and feedback sensors quickly.

Secure all wiring connectors tightly to prevent signal loss or intermittent failure during motion control.

After physical installation, power on the system and test velocity and acceleration control functions.

Verify real-time feedback data to ensure the drive communicates properly with the CNC control system.

Do not install the unit in direct sunlight, dusty areas or places with excessive mechanical shock.

Follow standard industrial wiring practices to maintain safety and consistent drive performance.