The Bently Nevada 83387-100 Hardline Cable serves as a critical link for accelerometer systems operating in extreme heat. Unlike standard softline options, this 100-inch cable uses mineral insulation and a robust stainless steel overbraid to withstand temperatures up to +1200°F (+649°C). Its construction ensures signal integrity where standard cables would fail. This cable is a genuine, new product and comes in its original factory packaging.
The 83387-100 cable is engineered for performance under severe thermal stress.
Length: 100 inches (8.3 feet / 2.54 meters).
Cable Type: Hardline, mineral-insulated (MgO) with a twisted shielded pair.
Protection: Stainless steel overbraid (AISI 304) for mechanical durability.
Accelerometer Mating Connector: Mates to an MS 3100R-10SL-4P receptacle and features a Viton insert.
Interface Module Mating Connector: Mates to an MS 3106-10SL-4S disconnect connector.
Furthermore, the cable construction is designed for low noise, making it suitable for sensitive vibration measurements. Notably, the 83387-100 cable's connectors are different from those on softline cables, which use an MS 3112-8-3P connector. Therefore, always verify your interface module's compatibility before ordering.
The primary advantage of this Hardline Cable is its exceptional temperature tolerance. This makes it the ideal choice for monitoring equipment in the hottest zones of a plant.
Cable: -65°F to +1200°F (-54°C to +649°C).
Accelerometer Connector: -65°F to +800°F (-54°C to +427°C).
Disconnect Interface Connector: -65°F to +800°F (-54°C to +427°C).
It is critical to remember that while the cable itself can handle +649°C, the system's overall temperature limit is governed by the connectors, which are rated to +427°C. Additionally, the mineral insulation is hygroscopic and will absorb moisture. For this reason, keep the cable sealed in its original bag with desiccant until you are ready to install it.
Proper installation is vital to maintaining the performance and longevity of the Bently Nevada 83387-100. These steps will help you achieve a reliable setup.
Handling: Keep the cable in its sealed, moisture-barrier bag until the moment of installation to prevent the mineral insulation from absorbing humidity.
Connector Mating: Only hand-tighten the connectors. Over-tightening can damage the pins or the Viton insert.
Routing: Plan your cable route carefully to avoid sharp bends. The minimum bend radius for the 83387-100 is 200mm (approx. 8 inches).
Support: Use stainless steel cable ties to support the cable at regular intervals, approximately every 12 inches. This prevents stress on the connectors and the cable itself.
Service Loop: Always leave a small service loop at both ends of the cable. This prevents tension from being transmitted to the connectors, which is crucial in high-vibration environments.
Each Bently Nevada 83387-100 Hardline Cable is delivered ready for immediate installation.
Package Contents: The cable assembly is shipped with both required connectors, protective caps installed, and a desiccant bag inside a sealed moisture barrier bag.
Documentation: An installation instruction sheet is also included in the box.
Shipping: We ship this product globally using FedEx, UPS, or DHL for fast and reliable delivery.
Q: What is the exact length of the 83387-100 cable?
A: The 83387-100 is exactly 100 inches long, which is equivalent to 8.3 feet or 2.54 meters. This model number corresponds directly to its length in inches.
Q: Can I use this Hardline Cable with a standard softline interface module?
A: No, it is not compatible. The 83387-100 cable uses an MS 3106-10SL-4S connector, while softline modules use an MS 3112-8-3P connector. You must verify that your interface module has the correct mating connector.
Q: Why is it important to keep the cable sealed before installation?
A: The cable's mineral insulation is highly hygroscopic. If exposed to ambient air for too long, it will absorb moisture, which can significantly degrade its insulation resistance and compromise measurement accuracy.
Q: What is the maximum operating temperature for the complete assembly?
A: Although the cable itself is rated to +649°C, the overall system is limited by the connectors to +427°C. Ensure that the entire installation environment does not exceed this temperature.
Q: What shipping methods are available for this cable?
A: We ship all orders via FedEx, UPS, or DHL. This ensures that your 83387-100 cable arrives quickly and safely, with full tracking available for every shipment.
| Brand Name | |
| Model No. | 83387-100 |
| Product Type | Hardline Cable |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
The Bently Nevada 83387-096 is a 96-inch Hardline extension cable engineered for extreme-temperature accelerometer connections. Its mineral-insulated twisted shielded pair and stainless steel overbraid withstand up to +649°C, making it essential for gas turbines, steam turbines, and high-temperature rotating machinery requiring longer reach.
The Bently Nevada 83387-065 is a 65-inch Hardline extension cable engineered for extreme-temperature accelerometer connections. Its mineral-insulated twisted shielded pair and stainless steel overbraid withstand up to +649°C, making it indispensable for gas turbines, steam turbines, and high-temperature rotating machinery.
The Bently Nevada 83387-132 is a 132-inch (3.35 m) Hardline Cable engineered for high-temperature accelerometer applications. It features mineral insulation and a stainless steel overbraid, enabling continuous operation up to +649°C. This cable delivers a stable, low-noise signal connection between an accelerometer and its interface module in extreme environments such as gas turbines, compressors, and furnace systems.
The Bently Nevada 45358-07 is a 7-meter (23 ft) Softline Extension Cable designed for accelerometer systems in moderate temperature environments. It features a twisted shielded pair with low-noise construction, protected by convoluted Teflon tubing. This cable provides a reliable signal connection between an accelerometer and its interface module in applications such as pumps, fans, and general industrial machinery.
This 24701 proximity probe housing assembly integrates a 3300 XL 8 mm probe with a 1.0‑meter cable and 9‑inch penetration. Its stainless steel construction, as‑cast mounting threads, and dome cover design suit heavy‑duty industrial monitoring applications.
This 31000 proximity probe housing accommodates a 3300 XL 8 mm probe with a 1.0‑meter cable and 15.4‑inch penetration. Its PPS construction, IP66/Type 4X protection, and no‑standoff design suit direct mounting in harsh industrial environments.
This 31000 proximity probe housing securely mounts 3300 XL 8 mm probes in harsh environments. It features glass‑reinforced PPS construction, IP66/Type 4X protection, and a 2.0‑inch standoff adapter for precise positioning.
This 4.0‑meter 3300 XL 11 mm extension cable features FluidLoc construction to block oil migration, FEP insulation for stable signals, and gold‑plated ClickLoc connectors. It suits turbine and compressor monitoring in demanding industrial environments.
3300 XL Standard Extension Cable Technical Guide and Installation Tips Product Introduction The Bently Nevada 330130-075-11-05 is a standard extension cable from the 3300 XL series. It forms part of…
330130-060-12-05 Replacement Sensor | Bently Nevada Proximitor Probe Installation Guide Product Introduction The Bently Nevada 330130-060-12-05 belongs to the 3300 XL 5 mm probe system family. This device measures radial…
Schneider Electric 140CPS11420 Modicon Quantum Power Supply Technical Guide Product Introduction The Schneider Electric 140CPS11420 is a dedicated power supply module within the Modicon Quantum series. Its primary role is…
Schneider 140CPS21100 AC/DC Power Supply Installation & Maintenance Product Introduction The Schneider Electric 140CPS21100 stands as a standard power supply for the Modicon Quantum automation platform. This module converts AC…
Fast delivery for urgent requirements.
Large stock ensures immediate availability.
Authentic, high-quality PLC components.
Reliable support to clients worldwide.