The Bently Nevada 74712-06-05-04-00 is a high-temperature two-wire velocity transducer designed for absolute casing vibration measurement. It delivers a sensitivity of 20 mV/mm/s and operates from -29°C to +204°C. This model features a 0° mounting angle, a 1/2-20 UNF-3A stud, and a side-mount connector with no agency approvals.
The Bently Nevada 173688-01-20-12-05 is a 3300 XL 8 mm proximity probe designed for non-contact vibration and position measurement. It features a 2.0 metre FluidLoc cable with a Miniature ClickLoc connector. The probe carries CSA, ATEX, and IECEx approvals for hazardous area installation.
The Bently Nevada 74712-06-05-04-01 is a high-temperature two-wire velocity transducer designed for machinery monitoring in extreme thermal environments. It delivers a sensitivity of 20 mV/mm/s and operates from -29°C to +204°C. This model features a 0° mounting angle, a 1/2-20 UNF-3A stud, a side-mount connector, and CSA approval.
The Bently Nevada 173687-01-50-12-05 is a 3300 XL 8 mm proximity probe designed for non-contact vibration and position measurement. It features a 5.0 metre FluidLoc cable with a Miniature ClickLoc connector. The probe carries CSA, ATEX, and IECEx approvals for hazardous area installation.
The Bently Nevada 86517 Accelerometer Interface Module is a dedicated component for vibration monitoring systems. It converts charge signals from piezoelectric accelerometers into scaled acceleration and velocity outputs. Designed primarily for use with the Bently Nevada 3300/95 monitor, this module is crucial for safeguarding aeroderivative gas turbines and other critical rotating machinery.
The Bently Nevada 3300/12-01-20-00 is a dedicated AC power supply for 3300 monitoring racks. It converts mains power into regulated DC voltages for up to 12 monitors. A built-in noise filter ensures signal integrity, and it installs in the left-most rack position.
The Bently Nevada 45357-01 is a charge-coupled piezoelectric accelerometer with a sensitivity of 50 pC/g ±5%. It features a 4-bolt mounting pattern on a 1.188-inch square and an MS3100R-10SL-4P connector. This accelerometer is suitable for vibration monitoring on gas turbines and rotating machinery in both standard and hazardous area installations.
The Bently Nevada 45358-07 is a 7-meter (23 ft) Softline Extension Cable designed for accelerometer systems in moderate temperature environments. It features a twisted shielded pair with low-noise construction, protected by convoluted Teflon tubing. This cable provides a reliable signal connection between an accelerometer and its interface module in applications such as pumps, fans, and general industrial machinery.
The Bently Nevada 83387-132 is a 132-inch (3.35 m) Hardline Cable engineered for high-temperature accelerometer applications. It features mineral insulation and a stainless steel overbraid, enabling continuous operation up to +649°C. This cable delivers a stable, low-noise signal connection between an accelerometer and its interface module in extreme environments such as gas turbines, compressors, and furnace systems.
The Bently Nevada 83387-100 Hardline Cable delivers a 100-inch (2.54-meter) connection for accelerometer interface modules in extreme heat. Its mineral insulation and stainless steel overbraid withstand up to 649°C, making it essential for gas turbines and high-temperature monitoring applications.
The Bently Nevada 83387-096 is a 96-inch Hardline extension cable engineered for extreme-temperature accelerometer connections. Its mineral-insulated twisted shielded pair and stainless steel overbraid withstand up to +649°C, making it essential for gas turbines, steam turbines, and high-temperature rotating machinery requiring longer reach.
The Bently Nevada 83387-065 is a 65-inch Hardline extension cable engineered for extreme-temperature accelerometer connections. Its mineral-insulated twisted shielded pair and stainless steel overbraid withstand up to +649°C, making it indispensable for gas turbines, steam turbines, and high-temperature rotating machinery.
