Schneider Electric BMXCPM0100 Modicon X80 Counter Module
Product Introduction
The BMXCPM0100 serves as a dedicated counting module inside the Modicon X80 I/O platform. This unit provides two counting channels for industrial pulse measurement tasks. System integrators use it for flow totalization, position tracking, and event counting. Because the module fits both M340 and M580 racks, it supports standardized spare-part management across mixed installations.
Technical Specifications
First, the BMXCPM0100 offers two counting channels with channel-to-channel isolation. This design prevents electrical interference from affecting neighboring signals. Furthermore, a module status LED enables quick fault identification during startup and maintenance.
The module runs on a 24 V DC supply drawn from the backplane. Power consumption is rated at 1.9 W. Meanwhile, bus current sits at 80 mA at 24 V DC. Additionally, the backplane supply eliminates the need for separate field power wiring to the module itself.
Mechanical and Environmental Data
Dimensions measure 100 × 28 × 93 mm (H×W×D). The unit weighs 0.15 kg, which simplifies handling during rack assembly. Besides, the single-slot profile saves valuable rack space in dense configurations.
Operating temperature ranges from 0°C to +60°C. Storage temperature spans -25°C to +70°C. Relative humidity tolerance stays between 5% and 95%, non-condensing. The protection rating is IP20, so the module requires mounting inside a clean control cabinet.
Installation Guide
Next, follow these steps to mount the BMXCPM0100 correctly.
Switch off rack power and verify zero voltage.
Align the module with a free slot in the X80 rack.
Slide the unit into the backplane connector until seated.
Tighten the retaining screw to secure the module.
Wire field signals to the front terminal block per the pin diagram.
Power the rack and check the module status LED.
Configure counter parameters in the engineering software.
Moreover, route signal cables away from motor power lines to reduce electrical noise. Therefore, counting accuracy improves in electrically noisy environments.
Packaging List
Shipping methods: Fedex, UPS, DHL.
FAQ
Q1: How many counting channels does the BMXCPM0100 provide?
A: The module includes two independent counting channels.
Q2: Does this module work with both M340 and M580 controllers?
A: Yes, the Modicon X80 platform supports both controller families.
Q3: What is the power consumption of this module?
A: It consumes 1.9 W with a bus current of 80 mA at 24 V DC.
Q4: Are the channels isolated from each other?
A: Yes, channel-to-channel isolation is a standard feature.
Q5: How many rack slots does the BMXCPM0100 occupy?
A: It takes one slot in the Modicon X80 rack.
