The IC695PSA040 from GE Fanuc is a compact and reliable power supply designed specifically for the RX3i PACSystem platform. This module delivers 40 watts of total output power, making it suitable for small to medium-sized control systems. It accepts a wide range of input voltages, including 85 to 264 VAC or 100 to 300 VDC, which provides flexibility for various industrial power environments.
Furthermore, this power supply generates three distinct output voltages to support different system needs. It provides a +5.1 VDC output for logic circuits, a +24 VDC relay output for driving external relays, and a +3.3 VDC output used internally by the backplane and attached modules. The IC695PSA040 also features a non-isolated ON/OFF switch located behind a hinged door to prevent accidental operation.
The IC695PSA040 operates with a nominal voltage of 120/240 VAC or 125 VDC. Its input range extends from 85 to 264 VAC and 100 to 300 VDC, accommodating global power standards. At full load, the module draws 70 watts of input power. The output voltage ranges are precisely regulated: 5.0 to 5.2 VDC for the 5.1V rail, 19.2 to 28.8 VDC for the 24V relay output, and 3.1 to 3.5 VDC for the internal 3.3V supply.
Meanwhile, the output current capacities are equally well-defined. The 5.1 VDC output supports up to 6 amperes, the 24 VDC relay output provides up to 1.6 amperes, and the 3.3 VDC internal output can deliver up to 9 amperes. Additionally, the module provides 250 VAC continuous isolation from input to backplane, with a 1500 VAC rating for one minute, ensuring robust protection for connected equipment.
The IC695PSA040 includes four status LED indicators for real-time diagnostics. These LEDs display Power, P/S Fault, Over Temperature, and Overload conditions. Consequently, technicians can quickly identify operational issues without external testing equipment. The power supply also includes a manual ON/OFF switch, though this switch does not disconnect the incoming AC/DC power. Instead, it enables or disables the output stages, and a projecting tab helps prevent unintentional switching.
This power supply is designed for panel or rack mounting within an industrial enclosure. It supports operation in temperatures ranging from 0 to 60 degrees Celsius, with storage temperatures from -40 to 85 degrees Celsius. The module also tolerates relative humidity from 5% to 95% non-condensing. For vibration resistance, it meets standard IEC 60068-2-6 requirements, ensuring reliable performance in typical factory floor environments.
The IC695PSA040 is compatible exclusively with the RX3i universal backplane. It is important to note that you cannot mix this power supply with other RX3i power supply models on the same backplane. Moreover, if your system requires more than 40 watts of power, you must install additional high-power modules on expansion backplanes, as the IC695PSA040 does not support redundancy or increased capacity through parallel operation.
For installation, first ensure that the backplane is securely mounted and grounded. Next, slide the IC695PSA040 into the designated leftmost slot of the universal backplane. Secure the module with the retaining screws, and then connect the input power wiring to the terminal block. Finally, verify the LED indicators to confirm proper operation before powering up the remaining RX3i modules.
Each IC695PSA040 unit ships in a sturdy anti-static package to prevent damage during transit. The box includes the power supply module, a terminal block connector, and a quick-start installation guide. All shipments are handled through trusted carriers, including FedEx, UPS, and DHL, with tracking numbers provided for every order.
1. Can the IC695PSA040 be used with a standard RX3i backplane?
Yes, the IC695PSA040 is designed for the RX3i universal backplane only. It will not function with older series backplanes.
2. What happens if I exceed the 40-watt load capacity?
Exceeding 40 watts can cause the power supply to enter overload protection. In this case, the Overload LED will illuminate, and the unit may shut down to prevent damage.
3. Does the ON/OFF switch disconnect all power?
No, the switch only enables or disables the DC outputs. The input AC or DC power remains present at the terminal block even when the switch is off.
4. Can I install multiple IC695PSA040 units in one rack?
Yes, you can install up to four power supplies per IC695 rack, but they must be placed in separate backplanes or expansion racks. Mixing them on the same backplane is not permitted.
5. What is the typical lifespan of this power supply?
With proper installation and within rated environmental conditions, the IC695PSA040 typically operates for over 50,000 hours before requiring replacement.
| Brand Name | |
| Model No. | IC695PSA040 |
| Product Type | Multi-Purpose Power Supply |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
The GE Fanuc IC200ALG328 is a 12-channel analog current-sourcing output module for the Versamax platform. It delivers precise 4-20mA signals with 13-bit resolution. This module supports fast update rates and includes diagnostic features for robust industrial automation.
The GE Fanuc IC200ALG326 Analog Output Module delivers eight single-ended current-sourcing outputs with 4-20 mA range and 15-bit resolution. It features diagnostics, configurable fault responses, and hot insertion support for flexible system integration.
The GE Fanuc IC200ALG325 Analog Output Module delivers eight single-ended voltage outputs with 13-bit resolution. It supports ±10 VDC and 0-10 VDC ranges, featuring diagnostics and configurable fault responses for versatile control.
The GE Fanuc IC200ALG322 Analog Output Module delivers four ±10.24 VDC voltage outputs with 12-bit resolution. It features 70 dB crosstalk rejection and diagnostic tools, making it ideal for precision control applications.
The GE Fanuc IC695CPE310 is a mid-range controller for the RX3i PACSystem. It features a 1.1 GHz processor, 10 MB user memory, and 32K discrete I/O capacity. This CPU includes one Ethernet port, two serial ports (RS-232 and RS-485), and a USB master port for flexible data transfer and system configuration.
The GE Fanuc IC695PSA140 is a 40-watt multi-purpose power supply for the RX3i PACSystem. It accepts 85-264VAC or 100-300VDC input and delivers three outputs: +5.1 VDC, +24 VDC relay, and +3.3 VDC internal. This unit supports load sharing and redundancy configurations, making it ideal for high-availability systems.
The IC200MDD847 is a GE Fanuc VersaMax mixed I/O module. It provides 8 sourcing AC inputs and 8 individually isolated Form A relay outputs rated at 2 A per channel.
The GE Fanuc IC200BEM002 is a Profibus DP network communication module for the Versamax series. It supports data rates from 9.6 Kbaud to 12 Mbaud and handles up to 125 stations with a repeater.
STBDAO5260 Schneider Electric Distributed Analog Output Module Installation & Maintenance Product Introduction The STBDAO5260 module serves as a key part of the Advantys STB distributed I/O system. Firstly, it provides…
STBDAI7220 I/O Module: Technical Guide for Installation and Maintenance Product Introduction The Schneider Electric STBDAI7220 serves as a core component in the Advantys STB ecosystem. This module accepts analog input…
Bently Nevada 21000-16-05-00-105-03-02 Proximity Probe Housing Assembly Technical Guide Product Introduction The Bently Nevada 21000-16-05-00-105-03-02 belongs to the 21000 Series of Proximity Probe Housing Assemblies. Moreover, this housing assembly provides…
21000 Series Proximity Probe System: Technical Guide for Installation and Maintenance Product Introduction The Bently Nevada 21000-16-10-00-256-01-02 belongs to the 21000 Series of proximity probe systems, a cornerstone technology in…
Fast delivery for urgent requirements.
Large stock ensures immediate availability.
Authentic, high-quality PLC components.
Reliable support to clients worldwide.