Originally developed by GE Intelligent Platforms, it is now managed and supported by Emerson Automation.

This module can be configured as 16 single-ended or 8 differential input channels based on system requirements.

It features four internal HART modems to communicate with smart transmitters on any channel.

All parameters are fully software-configurable with no jumpers or DIP switches required.

HART communication requires channels to be set to 4–20 mA for proper operation.

Voltage inputs include ±50 mV, ±150 mV, ±10V, 0–10V, ±5V, 0–5V, and 1–5V.

Current inputs cover 0–20 mA, 4–20 mA, and ±20 mA for standard industrial transmitters.

High input impedance and precision shunt resistors ensure accurate measurement.

Data can be output as IEEE 32-bit floating-point or 16-bit integer in a 32-bit field.

Auto-calibration runs automatically at power-up to maintain long-term measurement stability.

Open-circuit detection responds within 1 second for fast fault identification.

High resolution delivers reliable readings even for small signal variations.

Options include 8 Hz, 12 Hz, 16 Hz, 40 Hz, 200 Hz, and 500 Hz to reduce electrical noise.

Users can independently tune each channel to balance speed and stability.

Filters minimize fluctuations and improve performance in harsh industrial environments.

Each channel supports configurable scaling and offset for engineering unit conversion.

It provides continuous overvoltage protection up to ±60 VDC.

Overcurrent protection is rated at ±28 mA continuous to safeguard circuitry.

Input protection and fault detection ensure safe, reliable operation.

Stable power delivery supports 24/7 industrial operation.

Positive and negative rate-of-change alarms add an extra layer of process protection.

Onboard error monitoring detects faults and reports them to the CPU.

Terminal block detection alerts users to missing or loose connections.

Three LED indicators clearly show module status, field faults, and terminal block presence.

Storage temperature: -40°F to 185°F (-40°C to 85°C).

Humidity tolerance: 5% to 95% non-condensing.

It meets international shock and vibration standards for industrial environments.

The module fits in one slot of the RX3i universal backplane for high-density installation.

It is compatible with standard RX3i CPUs and backplanes.

Configuration uses Proficy Machine Edition software.

Compatible terminal blocks include box-style, spring-style, and extended versions.

Flash memory enables firmware upgrades for extended functionality.

A1: The GE IC695ALG626 supports 16 single-ended or 8 differential input channels.

A2: Yes, it supports HART Protocol Version 5.0 with four internal HART modems.

A3: It supports voltage from ±50 mV to ±10V and current 0–20 mA, 4–20 mA, ±20 mA.

A4: It uses a high-precision 24-bit analog-to-digital converter.

A5: We ship worldwide via Fedex, UPS and DHL for fast and secure delivery.