Originally produced by GE Intelligent Platforms, it is now maintained and supported by Emerson Automation.

This module can be configured as 16 single-ended channels or 8 differential channels based on system requirements.

It features a 24-bit ADC for high-accuracy conversion and supports fully software-configured operation.

No jumpers or DIP switches are needed; all parameters are set via Proficy Machine Edition.

Voltage inputs include ±50 mV, ±150 mV, ±10V, 0–10V, ±5V, 0–5V, and 1–5V.

Current inputs cover 0–20 mA, 4–20 mA, and ±20 mA for compatibility with most analog transmitters.

Voltage input impedance is greater than 100 kΩ to minimize signal loading.

Current inputs use a 249 Ω ±1% precision shunt for accurate measurement.

Data can be output as IEEE 32-bit floating-point or 16-bit integer in a 32-bit field.

Auto-calibration runs automatically at power-up to maintain long-term accuracy and stability.

Open-circuit detection responds within 1 second for rapid fault identification.

High resolution ensures reliable measurement even for small analog variations.

Options include 8 Hz, 12 Hz, 16 Hz, 40 Hz, 200 Hz, and 500 Hz to reduce noise and stabilize readings.

Users can balance response speed and signal smoothness for each individual channel.

Filters effectively eliminate unwanted fluctuations in electrically noisy industrial environments.

Each channel supports independent scaling and offset configuration for flexible engineering units.

It provides robust overvoltage protection up to ±60 VDC continuous.

Overcurrent protection is rated at ±28 mA continuous to safeguard internal circuitry.

Input protection and fault detection ensure safe operation in harsh industrial environments.

Stable power characteristics support continuous 24/7 operation.

Positive and negative rate-of-change alarms are also configurable for process safety.

Onboard error checking monitors channel health and reports faults to the host CPU.

Terminal block detection verifies proper installation and alerts on removal.

Module status is clearly indicated by OK, Field Status, and TB LEDs powered from the backplane.

Storage temperature ranges from -40°F to 185°F (-40°C to 85°C).

Humidity tolerance is 5% to 95% non-condensing for industrial environments.

It meets international vibration and shock standards per IEC 60068 and JIS C0911/0912.

Its compact single-slot design delivers high channel density to save cabinet space.

Configuration requires Proficy Machine Edition programming software.

Compatible terminal blocks include box-style, spring-style, and extended versions.

Extended terminal blocks are recommended for shielded wiring and noise reduction.

Flash memory support allows firmware upgrades to extend functionality over time.

A1: The GE IC695ALG616 supports 16 single-ended or 8 differential non-isolated analog input channels.

A2: It supports voltage from ±50 mV to ±10V and current 0–20 mA, 4–20 mA, ±20 mA.

A3: It uses a high-precision 24-bit analog-to-digital converter.

A4: Yes, it performs automatic auto-calibration at power-up.

A5: We ship worldwide via Fedex, UPS and DHL for fast, secure delivery.