GE Fanuc IC670MFP100 Micro Field Processor

IC670MFP100 GE Fanuc Field Control PLC Module

Product Introduction

The IC670MFP100 Micro Field Processor is a specialized and reliable control unit from the GE Fanuc Field Control product line. This processor acts as the brain for a field control station. It works alongside a Bus Interface Unit (BIU) to manage local I/O logic. You can use this module to control up to seven I/O modules in a single station.

Engineers choose the IC670MFP100 for its simple design and stable performance. It is a perfect fit for distributed control applications. This module requires no external power connection because the field control backplane supplies all necessary power. Additionally, it supports easy programming through the Logicmaster 90-30/20/Micro software or the IC693PRG300 hand-held programmer.

Key Technical Specifications

The GE Fanuc IC670MFP100 features a robust set of technical parameters. Understanding these details ensures proper system design.

• Input Voltage: 6.5 Volts DC (supplied by the backplane)

• Input Current: 300 mA at 24 Volts DC

• Maximum User Program Storage: 6K words

• Processor Core: H8/3003 microprocessor

• Scan Rate: 1.0 ms per K of logic (typical)

• Compatible Hand-Held Programmer: IC693PRG300

• Required BIU Firmware: Release 2.00 or later

• Supported Protocols: SNP, SNPX

• LED Indicators: PWR, OK, RUN, COMM

Communication and Compatibility

This module features a built-in communication port with a 15-pin D-type female connector. It supports the Series 90 communication protocols. Therefore, it integrates easily into existing GE Fanuc systems.

Furthermore, the IC670MFP100 includes an alarm processor function for better system monitoring. It also offers password protection to secure your PLC logic content. The CMOS RAM uses a capacitor for data retention during short power failures. This prevents program loss and improves reliability.

Mechanical and Environmental Data

• Dimensions: 3.25 x 2.0 x 2.9 inches (83 x 51 x 74 mm)

• Weight: 0.35 Pounds (0.16 kg)

• Mounting: DIN rail (any orientation)

• I/O Support: Up to 7 I/O modules per station (slot 0 for BIU, slots 1-7 for I/O)

• Connectors: Standard Field Control connectors

Installation Guidelines

Installing the GE Fanuc IC670MFP100 is straightforward. First, mount the module onto a standard DIN rail. You can place it in any slot on the stick except the slot reserved for the BIU. The BIU typically occupies slot 0. Then, insert the IC670MFP100 into the terminal block. Ensure the backplane connectors align properly. No additional power wiring is needed for the processor itself. Finally, connect your programming device to the 15-pin serial port to download the logic.

Important Notes for Installation:

• Use an IBM or IBM-compatible PC to configure the software.

• Avoid placing the module in an environment with excessive dust or moisture.

• Ensure the BIU firmware is version 2.00 or later for proper compatibility.

Supported Software and Tools

You can program this micro field processor using several tools. The most common options include:

• Logicmaster 90-30/20/Micro software

• IC693PRG300 Hand-Held Programmer

This flexibility makes the IC670MFP100 suitable for both on-site troubleshooting and full-scale system development.

Packaging List

Your order includes the following items:

1. GE Fanuc IC670MFP100 Micro Field Processor module (unit only)

2. Standard Field Control terminal block connector

3. Product information sheet (quick start guide)

Note: This product is shipped as a functional unit. No programming cable or additional mounting hardware is included.

Shipping Information

All orders are processed within 24 hours. We ship using trusted global carriers:

• Fedex

• UPS

• DHL

Frequently Asked Questions (FAQ)

1. What is the maximum program memory of the IC670MFP100?
The IC670MFP100 offers a maximum user program storage of 6K words. This non-volatile flash memory retains your logic even after a power cycle.

2. Can I use this processor with any BIU version?
No. This micro field processor requires a Bus Interface Unit (BIU) with firmware Release 2.00 or later. Older BIU versions will not recognize the module.

3. How do I know the module is working correctly?
The front panel features four LED indicators: PWR, OK, RUN, and COMM. The PWR LED shows backplane power. The OK LED indicates no internal faults. The RUN LED flashes during active scanning. The COMM LED shows serial port activity.

4. Does this module require a separate power supply?
No. The IC670MFP100 draws its required 6.5V DC power directly from the Field Control backplane. You do not need any extra power connections to the processor itself.

5. What programming languages does the IC670MFP100 support?
It supports the standard GE Fanuc instruction set used in Logicmaster software and the IC693PRG300 hand-held programmer. It typically uses Relay Ladder Logic (RLL) for program development.