GE Fanuc IC670TBM001 Auxiliary Terminal Block 2Pcs

IC670TBM001 GE Fanuc Auxiliary Terminal Block

Product Introduction

The IC670TBM001 belongs to the GE Fanuc Field Control product family. This auxiliary terminal block adds extra wiring points to your Field Control station. You receive two units in each order, as specified by the Qty. 2 configuration. Each block features nine barrier-style terminals that accept AWG #14 wire. This product is essential when you need additional common, ground, or return connections. Moreover, it works perfectly with analog I/O modules and high-density discrete modules.

Technical Specifications

The IC670TBM001 has a simple but robust design. Each terminal block contains nine screw-type barrier terminals. Every terminal accepts one or two AWG #14 wires, which equals a 2.1 square millimeter cross-section. The terminal type is barrier-style, providing reliable and secure field wiring.

Mechanical and Mounting Data
This auxiliary block mounts directly onto a DIN rail. You must install the main I/O terminal block first before adding the IC670TBM001. The mounting ears for this auxiliary block sit on the right side of the DIN rail. Each block weighs approximately 0.04 kilograms, so two units total 0.08 kg (gross weight including packaging is 0.12 kg).

Electrical and Field Wiring Usage
During field wiring, you can use the IC670TBM001 to provide extra shield termination points. You can also connect the chassis ground of any module to a ground terminal on this auxiliary block. For 3-wire or 4-wire transmitters, using this additional terminal strip is highly recommended. The terminals inside the module are electrically connected together, making them ideal for common point distribution.

Installation Guidelines

First, mount the primary I/O terminal block onto the DIN rail. Next, locate the mounting ear position on the right side of the rail. Then, attach the IC670TBM001 securely to the DIN rail beside the I/O block. Ensure the auxiliary block snaps firmly into place.

For field wiring, strip each AWG #14 wire to the appropriate length. Insert one or two wires into each barrier terminal and tighten the screw. Use the auxiliary terminals for common connections, ground returns, or shield terminations. If you need even more points, you can add multiple IC670TBM001 units side by side. Finally, verify all connections are tight before powering up the system.

Applications and Use Cases

Specifically, the IC670TBM001 shines in several scenarios. For analog input modules requiring multiple commons, this block provides clean termination points. For high-density discrete I/O, it offers extra returns without crowding the main terminal block. Additionally, when you use 3-wire or 4-wire transmitters, the auxiliary block gives you the necessary extra terminals. It is also the best solution for distributing a common voltage reference to several field devices.

Packaging List

• IC670TBM001 Auxiliary Terminal Block (Qty: 2 units)

• Each block has 9 barrier-style terminals pre-installed

• No mounting screws included (DIN rail clip attached)

• Product information sheet

Note: No certificates or warranty documents are included in the package.

FAQ

1. How many terminals does each IC670TBM001 block provide?
Each IC670TBM001 provides nine barrier-style terminals for field wiring connections.

2. What wire size can I use with this auxiliary terminal block?
You can use AWG #14 wire, and each terminal accepts one or two wires simultaneously.

3. Do I receive one or two blocks when ordering IC670TBM001?
The IC670TBM001 comes as Qty. 2, meaning you receive two auxiliary terminal blocks per order.

4. Can I mount this block without a main I/O terminal block?
No, you must mount the I/O terminal block first. The IC670TBM001 attaches to the right side of the same DIN rail.

5. Which shipping carriers do you use for this product?
We ship the IC670TBM001 via FedEx, UPS, or DHL for reliable worldwide delivery.