Bently Nevada 330877-080-36-00 8.0m FluidLoc Extension Cable
Product Introduction
The 330877-080-36-00 from Bently Nevada provides extended reach for your 3300 XL proximity monitoring system. This cable measures 8.0 meters (26.2 feet). You use it between a 3300 XL probe and its Proximitor sensor.
Additionally, this model uses FluidLoc cable construction. Note the difference from the -37 variant. The -36 option means FluidLoc cable without external armor. This makes it more flexible and lighter than armored versions.
Therefore, the Bently Nevada 330877-080-36-00 suits applications where external armor is unnecessary. Its 75 ohm triaxial design uses PFA insulation. The operating and storage temperature range spans -51°C to +200°C.
Furthermore, this cable carries no agency approvals (option code 00). It works perfectly for non-hazardous industrial sites. Each unit ships new in original factory packing with a 12-month warranty. We deliver via FedEx, UPS, or DHL.
Technical Specifications
Cable Length: 8.0 meters (26.2 feet)
Center to Coaxial Resistance: 2.0 ± 0.5 Ω
Coaxial to Coaxial Resistance: 0.6 ± 0.2 Ω
Material: 75 Ω triaxial, PFA insulated
Cable Type: FluidLoc (no external armor)
Agency Approvals: None (option 00)
For instance, resistance values scale with length. An 8.0 meter cable has roughly double the resistance of a 4.0 meter version. This is normal and expected.
Moreover, you must follow the total length rule. Add your probe length to this 8.0 meter extension cable. Their sum must equal the Proximitor sensor's total specified length. Failure to match lengths causes measurement errors.
Specifically, the cable option “080” means 8.0 meters. Armor option “36” confirms FluidLoc cable without external armor. Approval code “00” means no agency certifications.
Mechanical & Environmental Parameters
Operating Temperature: -51°C to +200°C (-31°F to +392°F)
Storage Temperature: -51°C to +200°C
Cable Jacket: PFA (perfluoroalkoxyethylene)
Construction: FluidLoc, chemically resistant
External Armor: None (flexible design)
Bending Radius: Tighter than armored versions
Besides, the FluidLoc material resists oils, water, and many chemicals. However, the lack of external armor means less mechanical protection. You must take care during installation.
Meanwhile, the PFA insulation maintains signal integrity across the full temperature range. This cable performs reliably in both hot turbine areas and cold outdoor locations.
Frequently Asked Questions (FAQ)
1. What is the difference between -36 and -37 options?
Option -36 is FluidLoc cable without external armor. Option -37 adds external armor. The 330877-080-36-00 is the non-armored version.
2. Can I use this 8.0m cable with any 3300 XL probe?
Yes, as long as the probe length plus 8.0 meters equals your Proximitor's total length. Always verify compatibility first.
3. Is the FluidLoc material approved for hazardous areas?
No, this specific model (option 00) has no agency approvals. For hazardous locations, choose the -05 approval option instead.
4. How do I clean the 330877-080-36-00 cable?
Use a soft damp cloth with mild soap. Avoid harsh solvents. Never submerge the connectors. Dry completely before reconnecting.
5. Do you offer faster shipping than FedEx/UPS/DHL?
These three carriers provide our standard fastest service. Contact us for expedited options. Extra charges may apply for priority delivery.
