330877-040-36-05 Bently Nevada Extension Cable

Bently Nevada 330877-040-36-05 Extension Cable

Product Introduction

The Bently Nevada 330877-040-36-05 belongs to the trusted 3300 XL series. This 50 mm extension cable connects a probe to a Proximitor sensor. You must add its length to the probe length so the total matches the Proximitor sensor's requirement. This version offers a 4.0-meter (13.1 feet) cable with FluidLoc armor. Additionally, it carries multiple agency approvals (Option 05). Therefore, this new & original cable ensures reliable signal transmission in harsh environments.

Technical Specifications

Cable Length Option (A): 040 = 4.0 meters (13.1 feet)
Armor and Cable Option (B): 36 = FluidLoc cable
Agency Approval Option (C): 05 = Multiple Approvals

DC Resistance Values:

• Resistance from center to coaxial conductor: 1.0 ± 0.25 Ω

• Conductor resistance from coaxial to coaxial: 0.3 ± 0.1 Ω

Cable Material: 75 Ω triaxial, PFA (perfluoroalkoxyethylene) insulated, FluidLoc cable.

Temperature Range: Operating and storage from -51°C to +200°C (-31°F to +392°F).

 maintains signal integrity over its entire length. Furthermore, its low resistance values guarantee accurate proximity measurements.

Mechanical & Environmental Parameters

The Bently Nevada 3300 XL extension cable uses a rugged FluidLoc jacket. This design resists moisture and chemical ingress. Consequently, it suits turbine, compressor, and generator applications. The cable operates continuously in extreme temperatures without performance loss. Additionally, its triaxial construction minimizes electromagnetic interference. For instance, you can install it near variable frequency drives or high-power cables.

Installation Guidelines

First, verify that the probe length plus the 330877-040-36-05 extension cable length equals your Proximitor sensor's total required length. Next, handle the cable carefully to avoid sharp bends. The minimum bend radius should follow Bently Nevada's recommendations. Then, connect the coaxial connectors securely. Finally, use the FluidLoc armor only in wet or corrosive areas. However, do not exceed the specified temperature range.

Packaging List

• 330877-040-36-05 extension cable (4.0 meters, FluidLoc)

• Factory packing with anti-static bag

• Installation instruction sheet (brief)

Note: Warranty and certificates are not included in the package.

Shipping Information

We ship all orders via FedEx, UPS, or DHL.  leaves our warehouse within 24 hours after payment confirmation. Tracking number provided immediately.

Frequently Asked Questions (FAQ)

1. Can I use the 330877-040-36-05 with any 3300 XL probe?
Yes, it works with all Bently Nevada 3300 XL 5 mm and 8 mm probes. Ensure the total length matches your Proximitor sensor.

2. What happens if the total length (probe + cable) does not equal the Proximitor length?
Measurement accuracy will drop significantly. Calibration errors may occur. Therefore, always verify the combined length.

3. Does the FluidLoc option make the cable fully submersible?
No. FluidLoc resists oil and moisture ingress but does not allow permanent submersion. Use it in splash zones only.

4. How do I clean the Bently Nevada 330877-040-36-05?
Wipe the exterior with a dry lint-free cloth. Avoid solvents or abrasive cleaners. They may damage the FluidLoc jacket.

5. Is the 12-month factory warranty transferable?
The warranty applies to the original purchaser only. We do not include warranty documents in the packaging. Contact us for warranty claims.