The Honeywell 900P01-0301 is a wide-input AC power supply for industrial control systems. It accepts 90 to 264 V AC and delivers 58W of output power. Test jacks for 5V and 24V simplify troubleshooting.
The Honeywell 900H32-0102 is a 32-channel digital output module for 24VDC systems. It features high-side driving, active current limiting, and galvanic isolation. This module is ideal for reliable sourcing outputs in industrial controls.
The Honeywell 900G32-0101 is a 32-channel digital input module designed for 24VDC sinking applications. It delivers reliable field signal acquisition with galvanic isolation, fast 5ms response, and wide voltage tolerance. This module suits industrial control systems needing dense, high-performance input handling.
The Honeywell TC-OAH061 is a 6-point analog output module designed for current loop signals. Each of its six channels is galvanically isolated. It outputs a 4-20 mA range with 13-bit resolution. The module updates all channels every 25 ms. You can drive loads up to 500Ω at 20.0 mA. Electronic current limiting protects against shorts.
The Honeywell TC-PIA081 is an 8-point analog current input module for 2-wire and 3-wire transmitters. It accepts 4-20mA signals with 16-bit resolution and 0.1% accuracy. This intrinsically safe module is now withdrawn and replaced by TC-PIA082. Please verify your system compatibility before ordering.
The Honeywell TC-PTBC11 is a screw-type terminal base for one I/O module. It supports intrinsically safe power supply channels and provides 52 screw terminals. This base is mechanically keyed before wiring to prevent errors. Ideal for non-hazardous and intrinsically safe applications.
The Honeywell TC-RPFM01 is a dedicated fiber module for ControlNet networks in non-hazardous areas. It works with a repeater adapter to extend communication up to 3km. This module ensures stable data transfer at 5M bit/s using 1300nm wavelength fiber optics.
The Honeywell TC-PMFO01 is a dedicated fiber module built for ControlNet networks in explosive environments. It works with a repeater adapter module and supports 62.5/125 micron fiber optics. With ST termination and a 1300nm wavelength, this unit transmits data up to 3km. Its galvanic isolation meets DIN EN 50 020 standards, making it ideal for hazardous locations like oil & gas or chemical plants.
The Honeywell TC-RPA001 is a ControlNet repeater adapter designed for non-hazardous locations. It supports two fiber modules and operates on 24Vdc nominal power. This device delivers reliable communication at 5M bit/s with full galvanic isolation between all bus interfaces.
The Honeywell TC-PBFO01 is a ControlNet repeater adapter built for hazardous locations. It supports two fiber module slots and delivers intrinsically safe communication at 5M bit/s. This device ensures reliable data transfer in explosive atmospheres with ATEX certification.
The Honeywell TC-PGCN11 is an intrinsically safe gateway module for Series C I/O systems. It supports up to 8 I/O modules. This unit provides ControlNet communication with galvanic isolation. It is certified for hazardous locations (EEx ib IIC T4).
The Honeywell TC-FOR081 is a relay digital output module with 8 Form A isolated electromechanical relays. Each channel is normally open. It supports both ac and dc loads up to 240V ac or 125V dc. This module offers high isolation and reliable switching for industrial control.
