The Allen-Bradley 1791-N4V2 is an analog Block I/O combination module. It provides four selectable analog inputs and two analog voltage outputs. You can configure the four inputs as current or voltage signals. This module features indefinite short circuit protection on its outputs. It communicates with PLC-2, PLC-3, PLC-5, and SLC family controllers through block transfer or discrete transfer methods.
The Allen-Bradley 1791-N4C2 is a 6-point analog Block I/O module. It provides four analog input channels and two current output channels. You can configure the four inputs as all voltage or all current inputs. This module communicates via block transfer or discrete transfer with PLC-2, PLC-3, PLC-5/250, and SLC family controllers. It includes a 24VDC loop power supply for transducers.
The Allen-Bradley 1791-8BR is a compact Block I/O combination module. It features eight 24VDC input channels and eight normally open relay output channels. This rackless module has a built-in power supply and RIO communication interface. You can mount it on a DIN rail or panel near field devices. It works with PLC-2, PLC-3, PLC-5, and SLC 500 families through Remote I/O protocol.
The Allen-Bradley 1791-8BC is a 16-point combination discrete I/O module from the Block I/O series. It provides eight 24VDC input channels and eight 24VDC output channels. This rackless module supports DIN rail mounting and communicates via Remote I/O (RIO) protocol. You can use it with legacy PLCs or modern Logix controllers through a RIO scanner.
The Allen-Bradley 1791-8AR is a compact Block I/O module with a built-in power supply and Remote I/O (RIO) interface. It offers eight 120VAC input channels and eight relay output channels. You can use this device to build distributed I/O architectures with legacy PLCs. It supports high-speed RIO communication up to 230.4K baud.
The Allen-Bradley 1769-HSC is a High-Speed Counter module for CompactLogix and MicroLogix 1500 controllers. It features two quadrature (ABZ) differential inputs with 1 MHz input frequency. This module also provides four physical and twelve virtual outputs. Ideal for position monitoring, flow control, and encoder interfacing.
The Allen-Bradley 1769-ECR is a Right End Cap module for CompactLogix systems. It terminates the FlexBus circuitry at the end of your I/O assembly. This component draws only 5 mA at 5.1V DC. You must install it to qualify your CompactLogix configuration properly.
The Allen-Bradley 1769-L30ER is a CompactLogix packaged controller from the 5370 family. It provides 1MB user memory, dual Ethernet ports, and a USB port. This controller supports up to eight Compact I/O modules and three expansion banks. Ideal for small to medium automation tasks.
The 1769-IR6 from Allen‑Bradley is a 6‑channel analog input module for RTD and resistance signals. It supports Platinum, Nickel, and Nickel‑Iron sensors. You can use 2‑wire, 3‑wire, or 4‑wire configurations. This module works with CompactLogix and MicroLogix 1500 controllers. Each channel provides open‑circuit and over‑range detection.
The 1769-IQ32T from Allen‑Bradley is a high‑density discrete input module with 32 channels. It uses a prefabricated cable for remote termination. This module supports sink or source wiring per group. It works seamlessly with CompactLogix and MicroLogix 1500 controllers. The included 1746-N3 connector simplifies field wiring significantly.
The 1769-IQ32 from Allen‑Bradley is a high‑density DC input module with 32 channels. It supports both sinking and source wiring. This module works perfectly with CompactLogix and MicroLogix 1500 controllers. You get four isolated groups of eight inputs each. It is a reliable choice for industrial discrete signal monitoring.
The Allen‑Bradley 1769-IQ16 is a 16‑point DC input module for CompactLogix and MicroLogix 1500 controllers. It accepts 24V DC sink or source digital signals. The operating voltage ranges from 10 to 30V DC depending on temperature. Two input groups provide eight channels each for flexible wiring. This module uses copper wire from 22 to 14 AWG. It works perfectly for interfacing switches, sensors, and relay contacts.
