The Allen-Bradley 1769-IT6 is a six-channel thermocouple and millivolt input module for the Compact I/O family. It supports multiple thermocouple types and includes two built-in CJC sensors. Designed for precise temperature measurement, it offers auto-calibration, open-circuit detection, and flexible filter settings.
The Allen-Bradley 1769-HSC is a High-Speed Counter module for CompactLogix and MicroLogix 1500 controllers. It features two quadrature (ABZ) differential inputs with 1 MHz input frequency. This module also provides four physical and twelve virtual outputs. Ideal for position monitoring, flow control, and encoder interfacing.
The Allen-Bradley 1769-ECR is a Right End Cap module for CompactLogix systems. It terminates the FlexBus circuitry at the end of your I/O assembly. This component draws only 5 mA at 5.1V DC. You must install it to qualify your CompactLogix configuration properly.
The Allen-Bradley 1769-L30ER is a CompactLogix packaged controller from the 5370 family. It provides 1MB user memory, dual Ethernet ports, and a USB port. This controller supports up to eight Compact I/O modules and three expansion banks. Ideal for small to medium automation tasks.
The 1769-IR6 from Allen‑Bradley is a 6‑channel analog input module for RTD and resistance signals. It supports Platinum, Nickel, and Nickel‑Iron sensors. You can use 2‑wire, 3‑wire, or 4‑wire configurations. This module works with CompactLogix and MicroLogix 1500 controllers. Each channel provides open‑circuit and over‑range detection.
The 1769-IQ32T from Allen‑Bradley is a high‑density discrete input module with 32 channels. It uses a prefabricated cable for remote termination. This module supports sink or source wiring per group. It works seamlessly with CompactLogix and MicroLogix 1500 controllers. The included 1746-N3 connector simplifies field wiring significantly.
The 1769-IQ32 from Allen‑Bradley is a high‑density DC input module with 32 channels. It supports both sinking and source wiring. This module works perfectly with CompactLogix and MicroLogix 1500 controllers. You get four isolated groups of eight inputs each. It is a reliable choice for industrial discrete signal monitoring.
The Allen‑Bradley 1769-IQ16 is a 16‑point DC input module for CompactLogix and MicroLogix 1500 controllers. It accepts 24V DC sink or source digital signals. The operating voltage ranges from 10 to 30V DC depending on temperature. Two input groups provide eight channels each for flexible wiring. This module uses copper wire from 22 to 14 AWG. It works perfectly for interfacing switches, sensors, and relay contacts.
The Allen‑Bradley 1769-IM12 is a 12‑point AC input module for CompactLogix controllers. It accepts 240V AC digital signals from high‑voltage field devices. The operating voltage ranges from 159 to 264V AC at 47 to 63 Hz. Each group of twelve inputs shares an internally connected common. This module uses copper wiring from 22 to 14 AWG. It works perfectly for interfacing legacy AC sensors and switches.
The Allen‑Bradley 1769-IG16 is a 16‑point TTL input module for CompactLogix controllers. It accepts 5V DC digital signals from TTL-compatible devices. The input voltage range spans 4.5 to 5.5V DC. You can select from multiple digital filter delays, including 0, 1, 2, 4, and 8 milliseconds. This module uses copper wire from 22 to 14 AWG. It works perfectly for high‑speed digital counting and logic sensing applications.
The Allen‑Bradley 1769-IF8 is an 8‑channel analog input module for CompactLogix and MicroLogix 1500 controllers. It accepts current signals like 0‑20 mA and 4‑20 mA, plus voltage signals such as ±10V, 0‑10V, 0‑5V, and 1‑5V. Each channel supports differential or single‑ended wiring. The module provides 16‑bit unipolar resolution for accurate data conversion. You can use it to monitor multiple sensors in industrial automation systems.
The Allen‑Bradley 1769-IF4I is a 4‑channel isolated analog input module for CompactLogix and MicroLogix 1500 controllers. It accepts current signals like 0‑20 mA and 4‑20 mA, plus voltage signals such as ±10V. Each channel is individually isolated to reduce electrical noise. The module provides 16‑bit resolution for accurate data conversion. You can use it to monitor sensors and transmitters reliably in industrial systems.
