PT-15/2 490-00105 TR Electronic Programming Interface

Product Introduction

Core Electrical Specifications

• Supply Voltage: 24 VDC ±10%
• Power Consumption: < 2 W
• Interface 1 (Programming/Comm): 15-pin Sub-D (Female) – RS485/Programming Port
• Interface 2 (I/O Connection): 16-pin Screw Terminal Block – Digital I/O, Power, and Signal Ground
• Signal Compatibility: TR Electronic incremental/absolute encoders (SSI, ISI, TTL/RS422)
• Isolation: Galvanic isolation (2.5 kV) for signal/ground protection
• Current Rating: 2 A per terminal (max)
• Termination: Screw terminals (24–16 AWG)
• Indicators: Power (Green), I/O Status (Red)
• Protection: Reverse polarity, over-voltage, short-circuit

Mechanical & Environmental Data

• Mounting: 35 mm DIN rail or panel mount (4 mounting holes)
• Dimensions: W×H×D = 45 × 100 × 110 mm
• Housing: ABS plastic, IP20 rated
• Operating Temperature: -20°C to +60°C
• Storage Temperature: -40°C to +85°C
• Humidity: 90% RH (non-condensing)
• EMC Compliance: EN 61000-6-2, EN 61000-6-4
• MTBF: > 300,000 hours

Key Functional Features

• Dual Interface Design: 15-pin Sub-D for programming/communication; 16-pin terminal block for direct I/O wiring
• Galvanic Isolation: 2.5 kV isolation prevents ground loops and protects control electronics
• Industrial Robustness: Wide temperature range, high EMC immunity, and dust/moisture resistance
• Simplified Wiring: Color-coded terminals and labeled Sub-D pins for error-free connection
• Status Monitoring: LED indicators for power and I/O activity for quick diagnostics
• Universal Compatibility: Works with TR Electronic encoders (CE/ZE/CM/CD series) and third-party sensors
• Space-Saving: Compact DIN-rail form factor minimizes cabinet footprint
• Plug-and-Play Setup: No complex configuration required for basic operation

Typical Applications

• Encoder Programming & Parameterization: Connecting TR encoders to PC/PT-100 programming terminals
• I/O Signal Routing: Bridging encoder signals (SSI/TTL/RS422) to PLC/control systems
• Control Cabinet Wiring: Centralized connection point for encoders, sensors, and control hardware
• Industrial Automation Setup: Commissioning and troubleshooting motion control systems
• Machine Tools, Robotics, Material Handling
• Packaging, Printing, and Textile Machinery
• General Factory Automation & Process Control

Connection & Mounting

• Mounting: Snap onto 35 mm DIN rail or panel mount via 4 mounting holes
• Wiring:
  • 15-pin Sub-D: Connect to programming tool/PC adapter (e.g., 490-00313)
  • 16-pin Terminal Block: Power (24 VDC/GND), encoder signals (A/B/Z/SSI), I/O outputs
• Cabling: Shielded twisted-pair (STP) recommended for high-noise environments
• Pin Labeling: Clearly marked pins/terminals for easy identification and wiring

Packaging List

• 1 × TR Electronic 490-00105 PT-15/2 interface module
• Mounting hardware (DIN rail clip + panel mount screws)
• Labeled wiring diagram
• Quick start guide

FAQ

1. What is the PT-15/2 (490-00105) used for?

   It is a cabinet interface module connecting encoders/sensors to programming tools/control systems via 15-pin Sub-D and 16-pin terminal block.

2. What voltage does it require?

   24 VDC ±10% power supply.

3. Does it provide electrical isolation?

   Yes, 2.5 kV galvanic isolation between signal and ground circuits.

4. Which encoders is it compatible with?

   TR Electronic CE/ZE/CM/CD series encoders (SSI, ISI, TTL/RS422 outputs) and third-party sensors.

5. How is it mounted?

   DIN-rail (35 mm) or panel mount with included hardware.