TR Electronic 480-00010 PT100-N Programming Terminal

Product Introduction

Core Electrical Specifications

• Supply Voltage: 11–27 VDCTR Electronic
• Power Consumption: < 3 W
• Communication Interface: RS485 (2-wire), 4800 baudTR Electronic
• Connector: 15-pin SUB-D (Female)TR Electronic
  • Pin 1: RS485-
  • Pin 2: RS485+
  • Pin 14: 11–27 VDC
  • Pin 15: GNDTR Electronic
• Display: 2×16 character LCD
• Input: Membrane keypad
• Data Storage: Non-volatile parameter memory
• Isolation: Galvanic isolation for signal/ground protection
• Protection: Reverse polarity, over-voltage, short-circuit

Mechanical & Environmental Data

• Mounting: Wall-mount (4 mounting holes)
• Dimensions (W×D×H): 91.5 × 146 × 28.5 mmTR Electronic
• Housing: ABS plastic, IP50 (DIN 40050)TR Electronic
• Operating Temperature: 0°C to +60°CTR Electronic
• Storage Temperature: -30°C to +60°CTR Electronic
• Humidity: 90% RH (non-condensing)
• EMC Compliance: EN 61000-6-2, EN 61000-6-4
• MTBF: > 200,000 hours

Key Functional Features

• Encoder Parameterization: Read, modify, and upload parameters to TR Electronic encoders (SSI, incremental, absolute)
• Position Monitoring: Real-time display of encoder actual position and status
• Data Comparison: Direct comparison of device parameters between terminal and connected encoder
• Multi-Language Support: English, German, French for global operationTR Electronic
• Service Functions: Device identification, fault diagnosis, and system reset
• Local Operation: Standalone design no PC required for on-site setup
• Industrial Robustness: Wide temperature range and IP50 rating for harsh factory floors
• Reliable Communication: RS485 interface for long-distance connection up to 1200 m

Typical Applications

• Encoder Commissioning: On-site parameter setup and calibration of TR encoders
• Field Maintenance: Quick diagnostics and parameter adjustment without PC access
• Motion Control Systems: Setup for CNC, robotics, and servo drives
• Machine Tools & Packaging: Configuration of encoders in high-demand industrial machinery
• Material Handling & Textile: Position feedback system parameterization
• General Factory Automation: Local device programming and troubleshooting

Connection & Mounting

• Mounting: Secure to wall/panel via 4 mounting holes
• Wiring:
  • RS485 Communication: Connect SUB-D pins 1 (RS485-) and 2 (RS485+) to encoder/controller
  • Power: Supply 11–27 VDC to pins 14 (+) and 15 (-)
• Cabling: Shielded twisted-pair (STP) recommended for noise immunity
• Pin Labeling: Clearly marked SUB-D pins for error-free installation

Packaging List

• 1 × TR Electronic 480-00010 PT100-N programming terminal
• Mounting screws & hardware
• Quick start guide & wiring diagram
• Multi-language user manual (English, German, French)TR Electronic

FAQ

1. What is the PT100-N (480-00010) used for?

   It is a wall-mount programming terminal for configuring, monitoring, and maintaining TR Electronic encoders and motion control devices via RS485.
2. What communication interface does it use?

   RS485 (2-wire) at 4800 baud via a 15-pin SUB-D connector.
3. What is the operating voltage range?

   11–27 VDC power supply.
4. Does it support multi-language operation?

   Yes, English, German, and French are pre-installed.
5. What is the protection rating?

   IP50 for dust and moisture resistance in industrial environments.