The 140DDO35310C discrete output module expands the control capabilities of Schneider Electric Modicon Quantum automation platforms. This unit delivers 32 output channels using negative logic (sink) with a 24V DC output voltage. Consequently, it enables precise control of actuators, indicators, and other field devices in industrial environments.
The 140DDO35310C operates with an output voltage range of 19.2 to 30V DC, with a nominal rating of 24V DC. It requires 2 output words for addressing, simplifying configuration within the Quantum backplane. The module organizes its 32 channels into 4 groups of 8, allowing flexible load distribution. Additionally, the bus current requirement sits at 330 mA, ensuring efficient power consumption from the rack.
For load handling, this module supports a maximum load current of 16A per module and 4A per group. Surge current capability reaches 5A for 1ms, accommodating transient loads during startup. Response times remain fast, with ≤1ms for both state 0 to 1 and state 1 to 0 transitions.
The 140DDO35310C incorporates comprehensive protection features for reliable operation. Each group contains an internal 5A fuse, while each individual point uses a 3A fuse rating. The module provides fault indication through LEDs for loss of field power and blown fuse conditions. Specifically, local signaling includes one green LED for bus communication status, one red LED for external fault detection, and 32 green LEDs for individual output status.
Furthermore, isolation between channels and the bus measures 1780 Vrms DC for 1 minute, while isolation between groups reaches 500 Vrms DC for 1 minute. This robust isolation prevents cross-channel interference and protects the backplane.
Maximum leakage current stays low at 0.4 mA at 30V, minimizing power loss when outputs remain off. The maximum voltage drop measures <0.4V at 0.5A, ensuring efficient power delivery to connected loads. For inductive loads, engineers can calculate load inductance using the formula: Inductance(H) = 0.5 / ((current(A))² × (switching frequency(Hz))). Maximum tungsten load capacity reaches 12W at 24V.
The 140DDO35310C operates reliably within an ambient temperature range of 0°C to 60°C. For storage, it withstands temperatures from -40°C to 85°C. Humidity tolerance extends to 95% without condensation, making it suitable for humid industrial environments. Operating altitude reaches up to 5000 meters, expanding deployment flexibility.
This module features a conformal coating (Humiseal 1A33) applied to protect against moisture, dust, and chemical contaminants. This treatment significantly enhances reliability in harsh environments. Additionally, the 140DDO35310C holds multiple certifications including UL 508, CSA C22.2 No 142, FM Class 1 Division 2, GOST, C-tick, RINA, and RMRS. These certifications confirm compliance with international safety and performance standards.
Installing the 140DDO35310C follows a straightforward procedure. First, disconnect all power sources to the rack before handling the module. Next, align the unit's connectors with the corresponding slots on the Quantum backplane. Then, slide the module firmly into place until it locks securely. Finally, connect the field wiring to the removable terminal blocks.
For optimal performance, verify the addressing configuration matches your system's requirements. The module uses 2 output words, so allocate appropriate memory space in your PLC program. After powering up, observe the LED indicators to confirm normal operation.
The 140DDO35310C fits seamlessly into various industrial automation applications. It controls solenoid valves, motor starters, indicator lamps, and relay coils in manufacturing plants and process facilities. Specifically, its negative logic configuration makes it compatible with sinking field devices commonly found in European and Asian markets. Moreover, its 32-channel density maximizes I/O capacity in limited rack space.
Each 140DDO35310C module ships in a sealed anti-static bag to prevent electrostatic discharge damage. The bag then rests inside a sturdy cardboard box with adequate cushioning material. Inside the package, you will find the output module itself and the necessary terminal block connectors. This packaging arrangement guarantees safe transit to your facility.
We dispatch all orders using premium international couriers including FedEx, UPS, and DHL. These services ensure prompt delivery with full tracking capabilities. Once we ship your order, we will provide a tracking number for your reference. Consequently, you can monitor your shipment's progress from dispatch to final delivery.
1. How many output channels does the 140DDO35310C provide?
This module delivers 32 discrete output channels organized into 4 groups of 8 channels each.
2. What logic type does the 140DDO35310C use?
It uses negative logic (sink) , meaning the output connects to ground when activated.
3. What is the maximum load current per group on the 140DDO35310C?
Each group supports a maximum load current of 4A, while the entire module handles 16A total.
4. Does the 140DDO35310C include output protection?
Yes, it includes internal protection through 5A fuses per group and individual 3A fuses per point.
5. What certifications does the 140DDO35310C hold?
It holds UL 508, CSA, FM Class 1 Division 2, GOST, C-tick, RINA, and RMRS certifications.
| Brand Name | |
| Model No. | 140DDO35310C |
| Product Type | Discrete Output Module |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
