Lenze I5DAE175F10010000S I550 Inverter 0.75 kW 3 Phase

Lenze I5DAE175F10010000S – Reliable i550 Inverter for Basic Motor Control

The Lenze I5DAE175F10010000S belongs to the modern i550 series. This inverter serves as a power unit for single-axis applications. It provides 0.75 kW (1.0 HP) of motor power. The supply voltage is 3-phase 400/480 VAC, supporting both 50 Hz and 60 Hz mains.

Because of its compact design, this unit saves panel space. The IP20 protection rating makes it suitable for dry indoor environments. Many users choose the I5DAE175F10010000S for conveyors, fans, pumps, and small handling machines.

Technical Specifications

Here are the core electrical parameters:

• Rated power: 0.75 kW / 1.0 HP

• Input voltage: 3 AC 400/480 V ±10%

• Input frequency: 50/60 Hz

• Output current: 2.4 A (constant torque)

• Output frequency: 0 – 599 Hz

• Protection rating: IP20

• Control method: V/f, V/f2, or sensorless vector control

Additionally, the Lenze i550 series includes an integrated keypad and display. This feature simplifies parameter adjustments. The I5DAE175F10010000S also supports brake choppers internally.

Mechanical Dimensions and Mounting

The dimensions are 90 x 175 x 140 mm (width x height x depth). Mount the unit vertically on a flat, conductive backplate. Use the four integrated mounting tabs. Maintain 100 mm clearance above and below for airflow. Furthermore, the operating temperature ranges from -10°C to 50°C without derating.

Installation Tips

First, disconnect mains power before handling the I5DAE175F10010000S. Next, use shielded motor cables up to 20 meters in length. For longer runs, add an output filter. Meanwhile, connect the ground terminal properly to reduce electromagnetic interference.

For instance, set motor parameters using the on-board keypad. The i550 series provides quick commissioning routines. Moreover, digital inputs accept PNP signals (24 V DC). Analog inputs accept 0–10 V or 4–20 mA. Finally, store parameter backups via the optional USB adapter.

Applicable Scenarios

The Lenze I5DAE175F10010000S fits many low-power applications. Specifically, it controls:

• Small conveyor belts

• Centrifugal fans and pumps

• Agitators and mixers

• Palletizing axes

• Winding and unwinding stands

Because the i550 series supports stall prevention and automatic torque boost, motor performance remains stable even under load changes.

Packaging List

• Lenze I5DAE175F10010000S inverter (power unit) – 1 unit

• Quick start guide (printed)

• 24 V DC logic connector

• Power terminal covers

• Safety label sheet

Note: Main power cables, motor cables, and external braking resistors are not included.

Shipping

All items are shipped via Fedex, UPS, or DHL. Tracking numbers are provided after dispatch.

Frequently Asked Questions (FAQ)

1. Can the Lenze I5DAE175F10010000S run a single-phase motor?
No. This inverter is designed for 3-phase induction motors only. Single-phase motors will be damaged.

2. Does the i550 series support fieldbus communication?
Yes. The I5DAE175F10010000S accepts optional communication modules. For example, PROFINET, EtherCAT, and CANopen are available.

3. How do I set the motor direction on this Lenze inverter?
Change parameter P200. Alternatively, swap any two output phases. The keypad also provides a direction toggle.

4. What is the maximum switching frequency for the I5DAE175F10010000S?
The unit supports 4 kHz, 8 kHz, and 16 kHz. Higher switching frequencies reduce motor noise but increase heat.

5. Can I use the Lenze I5DAE175F10010000S without a brake resistor?
Yes, for normal deceleration. However, for fast stops or high inertia loads, an external brake resistor is strongly recommended.