The Lenze E82EV552K4C200 belongs to the trusted Series 8200 family. This unit serves as both a frequency inverter and a base controller. It is designed for three-phase AC mains at 400V. The device supports vector control for superior motor performance. You get a typical motor power of 5.5 kW at 400V AC. Furthermore, the inverter accepts a wide input voltage range from 320V to 550V AC. For DC backup applications, it also runs on 450V to 775V DC.
The Lenze E82EV552K4C200 operates on a 3-phase AC mains with a rated voltage of 400V AC. Its mains voltage range extends from 320V to 550V AC. Alternatively, you can supply it with 450V to 775V DC. The frequency range covers 45 to 65 Hz. Therefore, this inverter works with both 50 Hz and 60 Hz power grids. Typical motor power at 400V AC is 5.5 kW.
Vector control is fully supported on this model. This control method provides excellent speed regulation and torque response. It suits dynamic applications like conveyors, pumps, and small hoists. The E82EV552K4C200 also functions as a base controller. Thus, it can manage basic logic tasks without an external PLC.
No EMC filter is integrated into this unit. This design simplifies installation where external filtering is already present. The enclosure carries an IP20 rating. It protects against solid objects larger than 12 mm. However, it does not resist water or dust. Mount it inside a clean, dry control cabinet.
The Lenze E82EV552K4C200 operates reliably from -10°C to +55°C. This wide range covers most industrial environments. For storage, you can keep it between -25°C and +60°C. Therefore, the unit tolerates seasonal temperature variations without damage.
This inverter uses natural convection cooling. No fan is required for normal operation. Above 45°C, a slight derating applies. Reduce the output current by 2.5% per additional degree Celsius up to 55°C.
| Parameter | Value |
|---|---|
| Dimensions (H x W x D) | 260 x 110 x 165 mm |
| Weight | 4.8 kg |
| Mounting type | Screw fixing |
| Protection rating | IP20 |
| Cooling | Natural convection |
First, choose a vertical mounting surface. Leave 100 mm clearance above and below the unit. This space ensures proper airflow. Next, mark four screw positions based on the mounting holes. Use M4 or M5 screws to secure the Lenze E82EV552K4C200 firmly. Finally, check that the unit sits level and stable.
Connect the three-phase mains to terminals L1, L2, and L3. For DC supply, use the same terminals with + and - polarity. Connect the motor to terminals U, V, and W. Use properly sized cables for 5.5 kW power. Tighten all power terminals to 0.8 Nm. Additionally, connect the ground terminal to the system earth.
Use shielded cables for analog input signals. Keep control wires separate from power cables. For start/stop and speed reference, connect to the terminal strip. The base controller function allows simple relay outputs.
1. What is the difference between the E82EV552K4C200 and the E82EV552-4C200?
The E82EV552K4C200 lacks an internal EMC filter and has a lower power rating of 5.5 kW. The E82EV552-4C200 includes an EMC filter and provides 7.5 kW. Both support vector control.
2. Can I run this inverter on single-phase power?
No. The Lenze E82EV552K4C200 requires a three-phase AC supply at 400V. Single-phase operation is not supported. Check your site power before purchasing.
3. Does this unit support closed-loop vector control with an encoder?
Yes. The base controller variant supports encoder feedback for closed-loop vector control. You need an optional encoder module for this feature. Consult the manual for compatible encoder types.
4. How do I set up vector control on the E82EV552K4C200?
First, perform motor parameter identification. Then set parameter C0006 to "1" for vector control. Finally, tune the speed controller gains. The quick start guide provides step-by-step instructions.
5. Is an external EMC filter required for CE compliance?
Yes. Since this unit does not include an internal EMC filter, you must add an external filter to meet CE emission standards. Lenze offers compatible filter models for Series 8200 drives.
| Brand Name | Lenze |
| Model No. | E82EV552K4C200 |
| Product Type | Frequency Inverter |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
