The KEB F5 Combivert Axis Drive, model 09F5B1B-2B0A, offers balanced performance for medium-load motion control tasks. Its power rating reaches 1.5 kilowatts, making it ideal for conveyor systems, packaging machines, and basic positioning applications. During normal operation, the drive draws a nominal current of 7 Amps. Meanwhile, it handles peak demands up to 15.1 Amps without losing integrity. A high 16 kHz switching frequency allows precise motor control while reducing electromagnetic noise.
The 09F5B1B-2B0A operates with a switching frequency fixed at 16 kHz. This high rate ensures smooth torque delivery at low speeds. Additionally, the drive meets EMC Category C1 requirements, meaning it suits residential and light industrial environments. For fault protection, the unit includes built-in short-circuit and earth fault monitoring per EN 60204-1. These features detect issues early, preventing equipment damage and unplanned downtime.
This axis drive carries an IP20 enclosure rating. It protects against solid objects larger than 12.5 mm but offers no water resistance. Therefore, install it only inside clean, dry control cabinets. The operating temperature range spans from -10°C to 45°C. Storage temperatures may vary between -25°C and 70°C. Such a wide range demonstrates the drive’s adaptability to different warehouse conditions.
First, mount the 09F5B1B-2B0A vertically on a flat, non-flammable surface. Maintain at least 100 mm clearance above and below for airflow. Next, connect the three-phase power supply according to the terminal labeling. Use shielded motor cables to preserve EMC performance. Then, wire the control signals through separate conduits to avoid interference. Finally, perform a short test run while monitoring the nominal current of 7 Amps to verify correct installation.
KEB 09F5B1B-2B0A drive unit ×1
Quick installation guide ×1
Power terminal connectors ×1 set
Control terminal plug ×1
All orders ship via FedEx, UPS, or DHL. Processing takes 1–2 business days. Tracking information is sent within 24 hours after dispatch.
1. Can the KEB 09F5B1B-2B0A run at a lower switching frequency?
No. This model has a fixed 16 kHz switching frequency. Lower frequencies are not available on this version.
2. What is the maximum cable length between this drive and the motor?
For EMC Category C1 compliance, keep shielded motor cables under 20 meters. Longer runs may increase radiated emissions.
3. Does the drive support any safety torque off (STO) function?
No. The 09F5B1B-2B0A provides short-circuit and earth fault monitoring but does not include STO. Use external safety relays if needed.
4. How do I reset a short-circuit fault on this axis drive?
First, remove power and clear the external short circuit. Then, wait 2 minutes before reapplying power. The fault resets automatically if no error remains.
5. Is the IP20 rating acceptable for food production areas?
Only if the drive is mounted inside an IP54 or higher enclosure. Direct exposure to washdowns or dust is not permitted.
| Brand Name | KEB |
| Model No. | 09F5B1B-2B0A |
| Product Type | Axis Drive |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
