KEB 07F5C1B-3B0A 0.75kW AC Drive – F5 Compact Series

KEB 07F5C1B-3B0A Compact AC Drive for General Purpose Applications

Product Introduction

The KEB Combivert F5 Compact drive, model 07F5C1B-3B0A, serves general purpose automation tasks. Its power capacity reaches 0.75 kW with an apparent power of 1.8 kVA. The drive operates on a 3-phase system with an input range of 305-440V AC at 50/60 Hz. Output voltage varies from 0 to 440V AC, while the output frequency spans from 0 to 1600 Hz. Rated output current sits at 2.6 Amps. A digital keypad operator (00.F5.060-1000) comes included for local control and monitoring.

Technical Specifications – Input and Output Parameters

The 07F5C1B-3B0A accepts an input current of 3.6 Amps at 305-440V AC. On the output side, it delivers 0-440V AC at 2.6 Amps with a frequency range of 0-1600 Hz. An integrated EMC filter comes standard, reducing electromagnetic interference. For motor control, the drive supports sensorless vector control plus traditional V/f control. The output frequency can also be limited to 0-800 Hz depending on parameter settings.

I/O and Communication Features

This AC drive includes generous I/O for flexible integration. It provides 2 analog inputs, 8 digital inputs, 2 analog outputs, and 2 relay outputs. For communication, the unit features both RS232 and RS485 ports supporting Modbus RTU protocol. The included digital keypad shows a 5-digit LED display, making parameter adjustment straightforward. Therefore, the 07F5C1B-3B0A connects easily to PLCs, HMIs, and other automation equipment.

Environmental and Mechanical Specifications

The enclosure rating stands at IP20, protecting against solid objects larger than 12mm. Install this drive only in clean, dry indoor cabinets. Operating temperature ranges from -10°C to +45°C, while storage temperatures span -25°C to +70°C. The KEB 07F5C1B-3B0A uses natural convection cooling. Maintain at least 100mm clearance above and below the unit for proper heat dissipation.

Installation Guidelines for the KEB 07F5C1B-3B0A

First, mount the 07F5C1B-3B0A vertically on a non-flammable, flat surface. Ensure the ambient temperature stays below 45°C. Next, connect the 3-phase input (L1, L2, L3) to a 305-440V AC source at 50/60 Hz. Use proper fusing rated for 3.6A input current. Then, wire the motor to output terminals (U, V, W). For communication, connect your PLC or HMI to either the RS232 or RS485 port. Finally, power up the unit and use the included digital keypad to set motor parameters.

Packaging List

• KEB 07F5C1B-3B0A AC drive unit ×1

• Digital keypad operator 00.F5.060-1000 ×1

• Keypad connection cable ×1

• Quick start guide ×1

• Power terminal connectors ×1 set

Shipping and Logistics

All orders ship via FedEx, UPS, or DHL. Processing takes 1–2 business days. Tracking numbers are provided within 24 hours after dispatch.

Frequently Asked Questions (FAQ)

1. Can the KEB 07F5C1B-3B0A run a single-phase motor?
No. This drive outputs 3-phase voltage only. It works with 3-phase induction motors. Single-phase motors are not supported.

2. What is the maximum output frequency of this drive?
The 07F5C1B-3B0A can output up to 1600 Hz. However, the default setting limits it to 800 Hz. You can change this via parameters.

3. Does the drive include a braking resistor?
No. The drive has no built-in braking resistor. An external braking resistor can be added if regenerative braking is needed.

4. How do I connect to the RS485 port?
Use a standard Modbus RTU connection. The 07F5C1B-3B0A supports RS485 two-wire wiring. Refer to the manual for pin assignments and baud rate settings.

5. Is the digital keypad removable?
Yes. The 00.F5.060-1000 keypad can be detached. You can mount it remotely using an extension cable (sold separately).