Honeywell FC-PSU-240516 Power Supply Module
Product Introduction
The FC-PSU-240516 is a power supply module from Honeywell's FC Series. It converts a 20-32 VDC input into a regulated 5 VDC output at 16 amps. Engineers specify this unit for control systems that need steady low-voltage power. Specifically, the module carries part number 136-011194D for cross-reference. Its FS-type construction means the board receives a non-conformal coating. Therefore, it resists moisture, dust, and airborne contaminants in factory settings. Meanwhile, the compact housing fits standard rack slots without extra adapters.
Technical Specifications
The input stage accepts 20-32 VDC and draws a maximum of 5.2 amps. On the output side, the module delivers 5 VDC at 16 amps continuously. Additionally, the unit protects downstream cards from overcurrent events. The FC-PSU-240516 maintains output stability during brief input sags. Furthermore, the 136-011194D designation helps buyers confirm compatibility with existing Honeywell racks. These ratings support backplane logic and I/O loads in process control cabinets.
Mechanical and Environmental Parameters
Operating temperature spans -5°C to +70°C (+23°F to +158°F). Storage temperature ranges from -40°C to +85°C (-40°F to +185°F). Relative humidity stays between 10% and 95%, non-condensing. Besides, the FC-type non-conformal coating adds a protective layer over the circuitry. This layer blocks condensation damage during cold starts and humid shifts. Consequently, the FC-PSU-240516 performs reliably in unheated cabinets and coastal plants.
Installation Guide
First, confirm the DC source stays within the 20-32 VDC window before wiring. Next, slide the module into its rack slot and secure the fasteners. Connect the input terminals to the DC bus, then wire the 5 VDC output to the load distribution point. Moreover, check every terminal for tightness to avoid arcing or voltage drop. Finally, power up the rack and measure the output at 5 VDC under load. Always follow site lockout procedures during installation.
Packaging List
1 × Honeywell FC-PSU-240516 Power Supply Module
1 × Anti-static protective bag
1 × Shock-absorbing foam packaging
Shipping via Fedex, UPS, DHL
FAQ
Q1: What input voltage does the FC-PSU-240516 accept?
A1: The module accepts 20-32 VDC and draws up to 5.2 amps.
Q2: What is the output rating of this power supply?
A2: It provides 5 VDC at 16 amps for connected backplane loads.
Q3: Does the FC-PSU-240516 include conformal coating?
A3: No, FS-type modules are non-conformal coated, as stated in the datasheet.
Q4: What is the operating temperature range?
A4: The unit operates from -5°C to +70°C (+23°F to +158°F).
Q5: How is the product shipped?
A5: We ship via Fedex, UPS, and DHL with protective packaging.
