Bently Nevada 3500/94M-02-00-02 VGA Display

3500/94M-02-00-02 Bently Nevada VGA Display Module

Product Introduction

The 3500/94M-02-00-02 from Bently Nevada brings visual monitoring directly to your 3500 rack. This VGA Display Module uses a 10" industrial display with a 19" rack mount. Furthermore, it includes multi-agency approvals for hazardous areas. Operators can view monitor status, data, and values through a high-speed network connection.

Technical Specifications

The 3500/94M-02-00-02 consumes only 4.6 watts maximum. It communicates via a high-speed network to retrieve monitor status and values. An RS232 port handles touch controller data. Additionally, the front port provides 24 Vdc power out, VGA signal out, and touch command input.

Front panel LEDs include:

• OK LED: Indicates proper module operation

• TX/RX LED: Shows communication with other system modules

The VGA port outputs analog red, green, blue, and sync signals to the display.

Agency Approval & Certifications

This model includes the multi-agency approval option (02). Therefore, it carries CSA, ATEX, and IECEx certifications specifically for the 10" display.

Compliance standards:

• EMC: EN 61000-6-2, EN 61000-6-4, Directive 2014/30/EU

• Electrical Safety: CSA C22.2 61010-1, UL EN 61010-1, Directive 2014/35/EU

• RoHS: Directive 2011/65/EU

The device also complies with FCC Part 15 rules. It must not cause harmful interference and must accept any received interference.

Environmental Limits

Operating temperature ranges from -20°C to 65°C (-22°F to 149°F). Storage temperature spans -40°C to 85°C (-40°F to 185°F). Humidity tolerance reaches 95% non-condensing.

Physical Characteristics

3500/94M VGA Display Module dimensions:
241.3 mm (H) x 24.4 mm (W) x 241.8 mm (D)
Weight: 0.73 kg (1.6 lb)

I/O module dimensions:
241.3 mm x 24.4 mm x 99.1 mm
Weight: 0.34 kg (0.75 lb)

Rack space requirements:
The monitor module occupies one full-height front slot. Similarly, the I/O module takes one full-height rear slot.

10" Advantech Display (Supplied)

The 3500/94M-02-00-02 includes a 10" Advantech display (ANA-D3510-100-A1). Key specifications:

• Diagonal: 10 inches

• Type: LCD with LED backlight, industrial hardened

• Mounting: Face mount, 19" rack mount, panel mount, or independent mount

• Power: 24 Vdc supply included (range 10-28 Vdc)

• Operating current: < 500 mA

• Temperature range: -20°C to 65°C

• Touch interface: GFG resistive touch screen

• Class I, Div 2 approved. Additionally, ATEX/IECEx certified

• IP54 designed rating

• Weight: 4.0 kg shipping

15" Advantech Display (Alternative Option)

For reference, a 15" display (FPM-8151) is available under other ordering codes. This industrial unit features:

• 15" diagonal LCD with LED backlight

• Power: 24 Vdc (12-24 Vdc range)

• IP65 front panel rating

• Temperature: 0°C to 60°C

• Not certified for hazardous locations

• Weight: 8.5 kg

System Requirements

The 3500/94M-02-00-02 requires a 3500/22 Transient Data Interface (TDI) module. Additionally, firmware and software must meet minimum versions:

• 3500/94M Firmware 4.06 Rev. C

• 3500/22 Firmware Rev 1.71

• 3500/01 Rack Config Software Rev 5.6

• 3500/02 Op Display Software Rev 2.21

• 3500/03 Data Acquisition Software Rev 1.22

KVM Extender Notes

A KVM extender option exists for this system. The receiver is approved for Class I, Division 2 hazardous areas in North America. However, the transmitter lacks hazardous certification. You must install it in a safe area or an approved enclosure like a purged cabinet.

Installation Guidelines

First, verify your rack includes a 3500/22 TDI module. Next, power down the 3500 rack completely. Insert the 3500/94M-02-00-02 main module into a full-height front slot. Then, mount the I/O module in the corresponding rear slot. Connect the VGA cable from the module to your display. Attach touch controller cables if needed. Finally, restore power and check the OK LED.

Shipping & Delivery

We ship all 3500/94M-02-00-02 modules via FedEx, UPS, or DHL. Each package includes proper anti-static and shock protection.

Packaging List

• 3500/94M-02-00-02 VGA display module – 1 unit

• I/O module (rear mount) – 1 unit

• 10" Advantech display (ANA-D3510-100-A1) – 1 unit

• 24 Vdc power supply for display – 1 unit

• Quick installation guide – 1 copy

Note: Certificates and warranty documents are not included in this package.

Frequently Asked Questions (FAQ)

1. Which TDI module works with the 3500/94M-02-00-02?
This display module requires a 3500/22 Transient Data Interface module. Older or different TDI modules will not function correctly.

2. Can I use the 15" Advantech display with this model?
No. The -02 option specifically includes the 10" display with 19" rack mount. Multi-agency approvals (CSA/ATEX/IECEx) apply only to the 10" screen.

3. What happens if my firmware is outdated?
The 3500/94M-02-00-02 will not operate properly. You must update firmware to version 4.06 Rev. C or newer on the display module and Rev 1.71 or newer on the TDI module.

4. Is the touch screen rated for hazardous areas?
Yes. The 10" Advantech display with GFG resistive touch carries Class I, Div 2, ATEX, and IECEx approvals when used with this module.

5. What is the minimum operating temperature for the display?
The 10" display operates from -20°C to 65°C. For the 15" option, the minimum sits at 0°C. Below freezing, a heated enclosure becomes necessary for the 15" unit.