Bently Nevada 330707-00-15-10-02-05 3300 XL Probe

Bently Nevada 330707-00-15-10-02-05 3300 XL 11 mm Proximity Probe

Product Introduction

This Bently Nevada 330707-00-15-10-02-05 sensor belongs to the trusted 3300 XL series. It is a non-contact eddy current probe for precise shaft vibration and position monitoring. This specific model offers a compact 1.0-meter total cable length. It includes a miniature coaxial ClickLoc connector for fast, secure installation.

The 11 mm probe tip uses durable Polyphenylene sulfide (PPS). Its case is crafted from AISI 304 stainless steel. Furthermore, the probe cable is a 75 Ω triaxial design with FEP insulation. This construction ensures reliable signal transmission in harsh environments. Therefore, the 3300 XL 11 mm Proximity Probe is ideal for turbomachinery and critical rotating equipment.

Technical Specifications

The Bently Nevada 330707-00-15-10-02-05 delivers stable performance across a wide temperature range. It operates reliably between -51°C and +177°C. The probe case threading is 5/8-18 UNF, with a maximum thread engagement of 0.938 inches. Moreover, its DC resistance from the center to the outer conductor is 5.9 ± 0.5 ohms. This precision ensures accurate gap voltage readings. Additionally, the system holds multiple agency approvals (Option 05). This simplifies compliance for global projects. The recommended probe case torque is 15.2 N•m, with a maximum rating of 45.2 N•m.

Mechanical and Environmental Parameters

Mechanical durability is a key feature of the 3300 XL 11 mm Proximity Probe. Its stainless steel case withstands high vibration and pressure. The pressure seal uses a Viton O-ring to seal the differential pressure. However, please note that these probes are not pressure tested before shipment. The cable has a minimum bend radius of 25.4 mm. This flexibility aids routing in tight spaces. Furthermore, the storage temperature range is -52°C to +177°C. Nevertheless, avoid exposing the unit below -34°C to maintain the pressure seal integrity.

Installation Guide

Installing the Bently Nevada 330707-00-15-10-02-05 requires careful attention to torque. First, tighten the probe case to the recommended 15.2 N•m. Exceeding 45.2 N•m may damage the threads or case. Next, connect the miniature coaxial ClickLoc connector. Finger-tighten it firmly to the extension cable. Use a wrench to avoid over-torquing, but never exceed 0.565 N•m on the connector itself. Meanwhile, the standard cable length of 1.0 meter suits short-run applications. For longer runs, consider extended cable options. Always verify the target material and gap voltage for calibration.

Packaging List

Your shipment will include the following physical items. Please inspect the contents upon arrival.

• 1 x Bently Nevada 330707-00-15-10-02-05 Probe Assembly

• 1 x Protective shipping cap for the probe tip

• 1 x Installation and mounting instruction sheet

Shipping & Delivery

We ship all orders via trusted global carriers. Choose from FedEx, UPS, or DHL. Stock availability ensures fast dispatch and reliable tracking.

Frequently Asked Questions

1. What is the total cable length of this proximity probe?
This model offers a total length of 1.0 metre (approximately 3.3 feet). It includes a standard cable with a miniature coaxial ClickLoc connector.

2. What thread type does the probe case use?
The Bently Nevada 330707-00-15-10-02-05 uses a 5/8-18 UNF thread. Its maximum length of thread engagement is 0.938 inches.

3. Can this probe operate in high-temperature environments?
Yes, it operates from -51°C to +177°C. However, do not expose it to temperatures below -34°C to prevent premature pressure seal failure.

4. Is the probe pressure tested before shipment?
No, these probes are not pressure tested prior to shipment. Contact the custom design department if your application requires a pressure seal test.

5. What shipping carriers do you use?
We ship using FedEx, UPS, and DHL to ensure reliable and fast delivery worldwide.