Allen-Bradley 1606-XLP30E Power Supply

1606-XLP30E 30W Compact DIN Rail PSU

Product Introduction

The 1606-XLP30E is a compact industrial power supply from the Allen-Bradley Bulletin 1606-XL series. It delivers a stable 30 watts of output power for small control systems and sensors. Specifically, this unit accepts a single-phase wide-range AC or DC input. Meanwhile, its slim housing saves valuable space inside tight enclosures. Furthermore, spring clamp terminals speed up wiring during installation. Therefore, this model suits machine builders who need a reliable low-power supply.

Technical Specifications

The electrical design of the 1606-XLP30E focuses on wide input tolerance and clean 24V output. Additionally, the unit maintains output stability across the full input range.

• Input Voltage: The unit accepts a nominal 100…240 V AC input. Moreover, the operational range spans 85…264 V AC for grid fluctuations. Besides, it also runs on 85 V DC input.

• Output Voltage: The output is 24 V DC nominal and adjustable from 24…28 V DC.

• Output Current: It supplies 1.3 A at 24.5 V, which equals the rated 30 W.

• Rated Power: Continuous output power is 30 W.

• Efficiency: Efficiency reaches 87.5% typical, which limits internal heat buildup.

• Hold-up Time: The unit holds output for >190 ms typical at 230 V AC. Consequently, short input dips do not disturb the load.

• Ripple and Noise: Output ripple stays below 50 mV maximum.

Mechanical and Environmental Parameters

The compact body of this power supply fits into small cabinets and wall-mounted boxes. Furthermore, the environmental range covers most indoor industrial sites.

• Dimensions: The unit body measures 75 × 45 × 91 mm (H × W × D). Its narrow width preserves DIN rail space for other devices.

• Weight: It weighs only 0.23 kg.

• Mounting: The housing supports both DIN rail and wall mounting. Therefore, installers can choose the layout that fits the panel.

• Operating Temperature: Operation starts at -10 °C. The upper bound is not published numerically on the product page.

• Storage Temperature: Storage starts at -40 °C. The upper bound is likewise not published numerically.

• Relative Humidity: The unit tolerates 5 to 95% non-condensing humidity.

• Protection Rating: The housing carries an IP20 rating, which suits open-frame cabinet installation.

• Connection: Spring clamp terminals accept both solid and stranded wires.

Installation Guide

Correct installation protects the 1606-XLP30E and extends its service life. First, disconnect all incoming power before touching any terminal. Next, snap the unit onto a DIN rail or fasten it to a wall using the mounting holes. Then, wire the input and output cables into the spring clamp terminals. Moreover, keep at least 20 mm of free space above and below the housing for convection cooling. Besides, connect the protective earth firmly to the designated terminal. Finally, verify the output voltage setting before attaching sensitive loads.

Packaging List

• 1606-XLP30E Power Supply Unit × 1

• Installation Instruction Sheet × 1

• Terminal Protection Covers (Pre-installed) × 1 Set

FAQ

Q1: Does the 1606-XLP30E include a power boost function?
A1: No. This compact model provides no power boost. Therefore, size your load to the continuous 1.3 A rating.

Q2: Can this supply run on DC input?
A2: Yes. The 1606-XLP30E accepts 85 V DC input in addition to its AC range. Consequently, it suits battery-backed or DC bus applications.

Q3: What terminals does the unit use?
A3: The unit uses spring clamp terminals for both input and output wiring. Specifically, these terminals reduce wiring time and resist vibration loosening.

Q4: Is the 1606-XLP30E still available?
A4: Yes. The model remains active on the official Rockwell product page. Moreover, stock is generally available through authorized distributors.

Q5: How do you ship this item?
A5: We ship globally via Fedex, UPS, and DHL. Additionally, tracking information accompanies every order for full visibility.