1606-XLSDNET8 192W DeviceNet Power Supply Allen-Bradley

1606-XLSDNET8 192W DeviceNet Power Supply

Product Introduction

The 1606-XLSDNET8 is a performance-grade power supply from the Allen-Bradley Bulletin 1606-XL series. It is purpose-built to feed DeviceNet bus networks with a stable 24-48V DC supply. Specifically, the unit delivers up to 8 A of bus current at 192 W. Meanwhile, a dedicated DC OK signal lets controllers monitor supply health. Furthermore, the wide output adjustment covers the full DeviceNet voltage window. Therefore, this model suits machine and process lines that rely on DeviceNet communication.

Technical Specifications

The electrical design of the 1606-XLSDNET8 targets DeviceNet bus power with high current capacity. Additionally, the adjustable output matches the bus voltage requirements of the network.

• Input Voltage: The unit accepts a nominal 120/240 V AC input. Moreover, it also operates from a 110…300 V DC source for flexible plant wiring.

• Output Voltage: The output is adjustable across 24…48 V DC, matching the DeviceNet bus supply range.

• Output Current: It supplies up to 8 A maximum, which equals the rated 192 W.

• Rated Power: Continuous output power is 192 W.

• DC OK Signal: A dedicated DC OK signal is present for remote status monitoring.

• Bus Terminals: Dedicated DeviceNet bus power output terminals simplify connection to the network trunk.

Mechanical and Environmental Parameters

The housing of this power supply fits standard control cabinets and DeviceNet junction boxes. Furthermore, the open-frame construction supports straightforward DIN rail installation.

• Dimensions: The unit measures 124 × 60 × 117 mm (H × W × D). Its 60 mm width keeps rail space efficient.

• Weight: It weighs approximately 900 g.

• Mounting: The unit is designed for DIN rail mounting, which speeds up panel assembly.

• Operating Temperature: The operating range spans -25...+70 °C. Consequently, the unit suits cold storage rooms and hot process areas alike.

• Protection Rating: The housing carries an IP20 rating, which suits open-frame cabinet installation.

• Humidity and Storage: The manufacturer does not publish relative humidity or storage temperature for this model.

Installation Guide

Proper installation keeps the 1606-XLSDNET8 reliable on a live DeviceNet network. First, disconnect the incoming AC or DC feed before wiring any terminal. Next, snap the unit onto a DIN rail inside the enclosure. Then, wire the input terminals and confirm the protective earth connection. Moreover, connect the DeviceNet bus power terminals directly to the network trunk. Besides, route the DC OK signal wiring to the controller input card. Finally, set the output voltage to the level required by the bus devices before powering the network.

Packaging List

• 1606-XLSDNET8 Power Supply Unit × 1

• Installation Instruction Sheet × 1

• Terminal Protection Covers (Pre-installed) × 1 Set

FAQ

Q1: What makes the 1606-XLSDNET8 different from a standard 24V supply?
A1: This model provides an adjustable 24…48 V DC output and dedicated DeviceNet bus terminals. Specifically, it feeds the bus directly without extra conditioning hardware.

Q2: How much current can the unit deliver?
A2: The 1606-XLSDNET8 supplies up to 8 A maximum at 192 W. Therefore, size the connected bus load within this limit.

Q3: Does the supply report its status to the controller?
A3: Yes. A DC OK signal is present on the unit. Moreover, this contact lets the PLC detect output failure or voltage loss.

Q4: Is the 1606-XLSDNET8 still available?
A4: Yes. The model remains active on the official Rockwell product page. Additionally, authorized distributors generally carry stock.

Q5: How do you ship this item?
A5: We ship globally via Fedex, UPS, and DHL. Additionally, tracking information accompanies every order for full visibility.