The Bently Nevada 330901-00-15-05-02-00 is a precision sensor from the field-proven 3300 NSv series. This model offers a 1/4-28 UNF threaded case without armor, providing a lightweight and compact solution for proximity measurement. Its total length reaches just 0.5 meter (20 inches), making it ideal for installations with limited space or where only a short cable run is needed. Additionally, this probe includes a miniature coaxial ClickLoc connector with standard cable. It delivers accurate, non-contact vibration and position monitoring for a wide range of rotating machinery.
The 330901-00-15-05-02-00 probe is built for reliable performance in demanding environments. Its case uses AISI304 stainless steel (SST) , offering excellent corrosion resistance. The probe tip is manufactured from polyphenylene sulfide (PPS) , ensuring long-term durability against wear. The cable is a 75 Ω coaxial type with fluoroethylene propylene (FEP) insulation, maintaining signal integrity even in harsh conditions. For this 0.5-meter version, the DC resistance from the center conductor to the outer conductor (RPROBE) is 4.0 ± 0.5 ohms. Furthermore, a Viton O-ring seals the probe to manage differential pressure between the tip and case.
This sensor operates effectively across a wide temperature spectrum. Its operating and storage temperature ranges are both from -52°C to +177°C (-62°F to +351°F) . However, prolonged exposure below -34°C (-30°F) can lead to premature seal failure, so careful attention to ambient conditions is recommended. The probe weighs approximately 14 to 150 grams (0.5 to 5.3 oz), with the shorter cable making this model one of the lightest in the series. For thread engagement, the 1/4-28 UNF thread should be engaged according to standard practices, though specific torque values for this thread size are not provided in the documentation.
The Bently Nevada 330901-00-15-05-02-00 offers significant benefits due to its short 0.5-meter cable length. This compact design minimizes cable management requirements and reduces the risk of cable damage during installation. Consequently, this model is particularly well-suited for retrofitting existing machinery where space around the measurement point is limited. Additionally, the shorter cable reduces overall system cost and simplifies troubleshooting, as there are fewer connection points to inspect. The absence of armor further enhances flexibility, allowing easier routing in tight spaces.
Proper installation of this 3300 NSv probe ensures optimal performance and longevity. First, thoroughly clean the mounting surface and inspect the 1/4-28 UNF threads for any damage. Then, hand-tighten the probe into its housing until it feels snug. Since this model lacks armor, handle the cable gently to prevent kinking or crushing. Next, set the correct air gap according to your specific application requirements, typically using a feeler gauge or micrometer. Finally, securely fasten the miniature coaxial ClickLoc connector to the extension cable or Proximitor sensor. For best results, route the cable away from high-voltage lines and sources of electromagnetic interference.
This 330901-00-15-05-02-00 probe meets various temperature classifications for hazardous area applications. For EPL Ga and Gc, it covers T1 through T5 classifications. For EPL Dc, it offers T280°C down to T90°C classifications based on ambient temperature. The "00" agency approval option indicates that no specific country approval is required for this model. Nevertheless, it complies with FCC Part 15, EMC Directive 2014/30/EU, and RoHS Directive 2011/65/EU. Therefore, this probe is ready for deployment in most industrial facilities worldwide.
1 x Bently Nevada 330901-00-15-05-02-00 3300 NSv Proximity Probe (0.5m cable)
1 x Basic installation instruction sheet
Shipping Method: FedEx, UPS, DHL
1. What is the cable length of the Bently Nevada 330901-00-15-05-02-00?
This model features a total length of 0.5 meter (20 inches) , as indicated by the "05" in the product number. This is the shortest option available in the 3300 NSv series.
2. Does this 3300 NSv probe include armor protection?
No, the 330901-00-15-05-02-00 is specified without armor. This makes it lighter and more flexible, which is beneficial for installations with limited space.
3. What type of connector does this probe use?
It uses a miniature coaxial ClickLoc connector with standard cable. This provides a secure and reliable connection for signal transmission.
4. What is the recommended application for this short-cable version?
The 0.5-meter cable makes this probe ideal for tight installations where the Proximitor sensor is mounted close to the measurement point, such as on small compressors, pumps, or gearboxes.
5. Is the 330901-00-15-05-02-00 suitable for hazardous area use?
Yes, this probe meets multiple temperature classifications for EPL Ga, Gc, and Dc environments. It covers T1 through T5 classifications, making it suitable for various hazardous locations.
| Brand Name | |
| Model No. | 330901-00-15-05-02-00 |
| Product Type | Proximity Probes |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
