The GE Fanuc IC697CPM914 is a 32 MHz CPU module for the Series 90-70 PLC platform. It features an 80486DX processor with floating point support, 512 KB battery-backed RAM, and one serial port. This module handles up to 12,000 I/O points and delivers fast Boolean execution for diverse automation applications.
The IC697BEM764 is a VME DLAN interface module from GE Fanuc, built for the Series 90-70 PLC system. It enables high-speed data exchange between drives and controllers via the VME bus. With an 80C186 processor, flexible address/data options, and rugged environmental tolerance, this module ensures reliable communication in industrial automation.
The GE Fanuc IC697ALG440 is a 16-channel current input expander module for the Series 90-70 PLC system. It accepts 4 to 20 mA signals, offers 16-bit resolution, and updates in 2.4 ms. This module works with a base converter and voltage expander to create a flexible analog input subsystem.
The GE Fanuc IC697CPX782 is a high-performance CPU module for the Series 90-70 PLC platform. It features a 96 MHz 80486DX4 processor, 1 MB battery-backed RAM, 256 KB non-volatile memory, and three serial ports. This module supports up to 12,000 I/O points and delivers 0.4 µs Boolean execution for demanding automation tasks.
The GE Fanuc IC697CPU788 is a TMR-capable CPU module for the Series 90-70 PLC family. It features a 16 MHz 80386DX processor, 512 KB battery-backed RAM, and 0.4 µs Boolean execution. This module serves critical applications like emergency shutdown, fire detection, and gas control systems.
The GE Fanuc Emerson IC695PNS001 is a single-slot Profinet scanner module for the PACSystems RX3i platform. It connects remote I/O racks to a Profinet network via four switched Ethernet ports. This module supports flexible topologies, includes a USB port for firmware updates, and simplifies configuration using an SD card.
The GE Fanuc IC697ALG441 is a 16-point differential analog input expander for the Series 90-70 PLC system. It accepts -10 to +10V signals, offers 2ms conversion rate, and supports daisy-chain expansion up to 120 inputs. Factory-calibrated at 10V ±2mV with high accuracy, this module minimizes material costs while maximizing system efficiency.
The GE Fanuc IC693MDL350 is a 16-point isolated output module for the Series 90-30 PLC system. It operates on 120 to 240V AC, delivers 2A per point, and features full isolation between outputs and backplane. With DIP switch configurable fail-safe behavior, LED indicators, and high noise immunity, this module provides reliable control for inductive and incandescent loads.
The GE Fanuc IC693MDL231 is an 8-point isolated input module for the Series 90-30 PLC system. It operates on 240V AC, draws 15mA per point, and features 1500V RMS isolation between field and logic sides. With eight LED indicators, a front door panel for circuit identification, and compatibility with 5-slot and 10-slot baseplates, this module provides reliable AC input sensing for pushbuttons, limit switches, and proximity sensors.
The Emerson IC697CPX935 is a high-performance CPU module for the Series 90-70 PLC platform. Powered by a 96 MHz 80486DX4 microprocessor, it delivers 0.4 µs boolean execution and supports up to 12K discrete I/O plus 8K analog I/O. With three built-in serial ports, 1MB battery-backed RAM, and 256KB flash memory, this single-slot processor handles complex control tasks in demanding industrial environments.
The GE Fanuc IC697PWR724 is a 90W power supply module for the Series 90-70 PLC system. It operates on 24VDC nominal input (18-32VDC range), delivers 5V, 12V, and -12VDC outputs, and supports single-rack or dual-rack configurations. With overvoltage/overcurrent protection, 10ms ride-through time, and VME compatibility, this module ensures stable power delivery for demanding industrial automation applications.
The GE Fanuc IC697BEM763 is a single-slot interface module for the Series 90-70 PLC system. Powered by a 12 MHz 80C186 microprocessor, it provides enhanced communication between local area networks and PLCs. This module supports DLAN and DLAN+ protocols, enabling configuration and control of DC300, AC2000, and DC2000 drives through the PLC application program.
