The IS200TDBSH2A is a Simplex Discrete I/O Terminal Board from GE's Mark VIe series. This board provides 24 contact inputs and 12 relay outputs. It supports DIN-rail or flat mounting. The jumper-selectable excitation voltage works with 24VDC or 125VDC systems.
The IS200TRPGH1BCC is a Primary Trip Terminal Board from GE's Mark VI series. This board manages gas turbine trip functions. It works with PTUR and YTUR controllers. Nine magnetic relays support three voting circuits. Eight flame detector inputs provide reliable monitoring.
The IS210AEBIH3BEC is an Alternative Energy Bridge Interface from GE’s Mark VIe series. This special PWA uses standard conformal coating for reliable insulation. It supports wind turbine control applications. Its compact assembly ensures stable performance in industrial environments.
The IS210AEBIH3BED is an Alternative Energy Bridge Interface from GE’s Mark VIe series. This special PWA uses standard conformal coating for reliable insulation. It supports wind turbine control applications. Its compact assembly ensures stable performance in industrial environments.
The IC660BBS102 is an isolated I/O block from GE Fanuc, now under Emerson. It provides 8 circuits in 4 isolated groups of 2. Each group supports 115 VAC or 125 VDC. This block reports failed switch diagnostics. It replaces the older IC660BBS100 model.
The IC660BBS101 is an isolated I/O block from GE Fanuc. It provides 8 circuits in 4 isolated groups. Each group supports 115 VAC or 125 VDC at 2 Amps. You can configure it as input-only, output-only, or a combination. This block does not report failed switch diagnostics.
The IC660BBS100 is an isolated I/O block from GE Fanuc. It provides 8 circuits in 4 isolated groups. Each group contains two circuits. The block supports 115 VAC or 125 VDC at 2 Amps. You can configure it as input-only, output-only, or a combination of both.
The IC660BBR101 is a normally open relay output block from GE Fanuc. It provides 16 output circuits grouped into four groups of four. Each output supports AC or DC power. This block works well for low-power devices like contactors, relays, and lamps.
The IC660BBD120 is a high-speed counter block from GE Fanuc. It handles 12 inputs and 4 outputs with a 200 kHz rate. This module works without a CPU for direct counting and control. Perfect for turbine flowmeters and motion systems.
The IC660BBD110 is a 16-point low leakage discrete input block from GE Fanuc. It operates at 115 VAC nominal, 93-132 VAC range, 47-63 Hz. Programmable input thresholds from 25% to 85% are available. The block detects open wire and shorted wire faults. It supports right-side up or upside-down mounting.
The IC660BBD101 is an 8-circuit low leakage I/O block from GE Fanuc. It operates at 115 VAC, 93-132 VAC range. Each circuit configures as input or output. Electronic fuses protect against overcurrent. No separate power supply is needed as control power comes from I/O device voltages.
The IC660BBD100 is an 8-circuit grouped I/O block from GE Fanuc. It operates at 115 VAC, 50/60 Hz. Each circuit works as input, tri-state input, or output. No separate power supply is required. This block supports redundant CPU configurations automatically.
