The Yokogawa YCB301-C100 functions as the high-speed communication artery within the FIO system architecture. Specifically, this cable facilitates the rapid exchange of control data between the Field Control Unit and various expansion nodes. By utilizing a 36-pin to 36-pin interface, the cable maintains the deterministic timing required for complex automation. Furthermore, the high-quality shielding protects the ESB bus signals from electromagnetic interference present in typical industrial control rooms. Therefore, the Yokogawa YCB301-C100 ensures reliable data throughput for critical process control loops in large-scale plants.
In terms of connectivity, the Yokogawa YCB301-C100 links the EC401 coupler module directly to the SB401 slave module. Specifically, the 1-meter length provides the perfect distance for connections within the same cabinet or adjacent racks. Meanwhile, the robust connector design features a secure locking mechanism that prevents accidental disconnections due to cabinet vibrations. Additionally, the cable supports the massive I/O capacity of the Centum VP system by handling high-frequency data bursts. Consequently, technicians prefer this original cable to maintain peak communication stability and avoid costly unplanned system downtime.
Regarding technical performance, the Yokogawa YCB301-C100 complies with the strict signal integrity requirements of the ESB bus. Specifically, the internal twisted-pair wiring matches the impedance needs of the Yokogawa backplane to prevent data reflections. Moreover, the C100 suffix designates a 1-meter span, which effectively minimizes propagation delay in high-speed control cycles. For instance, using an original cable prevents the CRC errors that frequently occur when using lower-quality third-party alternatives. Next, the flexible jacket material allows for easy routing through dense cable trays without damaging the internal copper conductors.
Specifically, the Yokogawa YCB301-C100 features a compact and lightweight profile with a net weight of approximately 0.45 kg. Its rugged construction allows it to function stably within the standard temperature ranges of typical industrial control cabinets. Furthermore, the cable employs gold-plated pins on the 36-36 pin connectors to resist corrosion in humid environments. Besides its durability, the cable adheres to strict flame-retardant standards to ensure safety during unexpected electrical faults. Finally, the standardized connectors guarantee a perfect fit for all Yokogawa FIO series modules and bus couplers.
First, ensure that the system power is off before you attempt to connect any ESB bus hardware components. Next, align the 36-pin connector of the Yokogawa YCB301-C100 with the port on the EC401 coupler module. After that, push the connector firmly into the socket and tighten the retaining screws to lock the connection. Furthermore, route the cable through the designated management trays while avoiding sharp bends that might damage the shielding. Finally, connect the opposite end to the SB401 slave module and verify that the link indicators show active communication.
1 x Yokogawa YCB301-C100 ESB Bus Cable (1m)
Protective dust caps for both 36-pin connector ends
Shipping Carrier: Fedex, UPS, DHL
Q: Can I use the YCB301-C100 for redundant bus configurations? Specifically, you must use two Yokogawa YCB301-C100 cables to connect the primary and secondary ports in redundant setups.
Q: Does the 1-meter length include the connectors on both ends? Yes, the 1-meter specification for the Yokogawa YCB301-C100 represents the total end-to-end length of the entire cable assembly.
Q: Are there other lengths available in the YCB301 cable series? Absolutely, Yokogawa provides various lengths such as the C200 (2m) and C400 (4m) to accommodate different cabinet distances.
Q: Which modules require the YCB301-C100 for proper communication? The cable primarily connects the EC401 or EC402 bus couplers to the SB401 slave modules within the node.
Q: Is this cable compatible with the ProSafe-RS safety system? No, the Yokogawa YCB301-C100 is for the ESB bus; ProSafe-RS typically requires the AKB series signal cables instead.
| Brand Name | Yokogawa Electric |
| Model No. | YCB301-C100 |
| Product Type | ESB Bus Cable (36-36 pins) |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
