The Yokogawa SB401-50 acts as the primary communication link for ESB bus node units within the FIO system. Specifically, this module facilitates the transmission of I/O data between the remote node unit and the central Field Control Unit (FCU). As a "Standard Type" module with no explosion protection, it provides a cost-effective and highly efficient solution for non-hazardous industrial environments. Furthermore, the dual-port capability of the ESB architecture allows for flexible system expansion and robust network stability.
In terms of system integration, the module requires an EC401 or EC402 coupler module at the FCU end to establish a valid link. Specifically, the ESB bus architecture supports various chassis models such as the AFV30, AFV40, and A2FV50/70. Meanwhile, the system maintains a high-speed transmission rate to ensure that the central controller receives field data with minimal latency. This high-speed performance is essential for complex process control applications where real-time responsiveness is a critical requirement.
The Yokogawa SB401-50 accommodates a wide variety of industrial power standards to match different regional requirements. For instance, users can specify suffix codes for 100-120 V AC, 220-240 V AC, or 24 V DC configurations. Specifically, the 24 V DC version consumes approximately 5.5 A, while the AC variants maintain a steady power draw of 120 W. This versatility ensures that the module can integrate into existing plant infrastructures without the need for additional power conversion hardware.
Specifically, the Yokogawa SB401-50 is designed for high-density cabinet installation within the FIO node unit. The module assembly has an approximate weight of 10 kg when it includes a full set of eight I/O modules. Moreover, the robust construction allows it to operate reliably in standard control room environments. Since this model is the "Basic Type" (Suffix 0), it offers the foundational interface features required for ESB bus synchronization without unnecessary hardware complexity.
First, verify that the EC401 or EC402 coupler is properly installed in slot 7 of the FCU before connecting the slave. Next, slide the Yokogawa SB401-50 into the designated interface slot of the ESB bus node unit. After that, connect the dedicated ESB bus cables between the coupler and the slave module to establish the physical link. Finally, check the status indicators on the front panel to confirm that the node has successfully synchronized with the Field Control Unit software.
1 x Yokogawa SB401-50 ESB Bus Interface Slave Module
Factory-Original Protective Packaging
Shipping Carrier: Fedex, UPS, DHL
Q: Which coupler modules are compatible with the SB401-50? Specifically, the module requires a Yokogawa EC401 or EC402 ESB Bus Coupler installed in the central Field Control Unit.
Q: Can I use this module in a redundant configuration? Yes, you can establish redundancy by installing couplers in both slot 7 and slot 8 of the FCU and connecting the slave accordingly.
Q: What is the weight of the module including I/O cards? The total weight reaches approximately 10 kg when the node unit is fully populated with its maximum capacity of eight I/O modules.
Q: Does this module support 24 V DC power supplies? Absolutely, the Yokogawa SB401-50 offers a specific 24 V DC version that draws approximately 5.5 A during standard operation.
Q: Can the Yokogawa SB401-50 be installed in hazardous locations? No, the Suffix 5 indicates that this is a standard type with no explosion protection, intended for use in safe industrial areas.
| Brand Name | Yokogawa Electric |
| Model No. | PW482-50 |
| Product Type | Power Supply Module |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
